Overdriving Subs??

Yes. I have it on ac volts. I removed speaker wires and put my red(+) and black (-) leads inside speaker terminal and nothing
So this is on the XD1000/1? Are you using an 50Hz sinewave, radio @75% volume, bass on radio @100% (no bass boost), and amp's bass knob @75%? Then sweep the Gain until you hit target voltage.
 
So this is on the XD1000/1? Are you using an 50Hz sinewave, radio @75% volume, bass on radio @100% (no bass boost), and amp's bass knob @75%? Then sweep the Gain until you hit target voltage.
This is on my hyfoniks 1000D.. i played 55 test tone and 60. But i didn't have my bass on radio up at all. I don't have a bass knob. Dont think i need it. Ty let me check right now
 
Then sweep the Gain until you hit target voltage.
Target voltage is 31.6. I left at like 30 or 28. Might have to tune it more down. Only running one 2ohm+2ohm dvc 10"s- series alpine. I think i fried the other 10 but don't know how that happened. I had both wired to 1ohm. Now just have the one sub at 1ohm. Little sob hits hard. I love it. Need to get another 10" though so you can hear me a block away lol
 
Activity
No one is currently typing a reply...

Similar threads

Brahmas are nice. I have a 10" Mk1. Just a single 10 was enough for me.
19
847
These are also very good drivers, some of the best bang for the busk on shallow mounts. DD Audio SL610-D2 10"...
5
645
Well, get Two then and try to share for peeks sake!! :poop: :ROFLMAO::ROFLMAO::ROFLMAO:
16
1K
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
2
557

About this thread

rovster

CarAudio.com Recruit
Thread starter
rovster
Joined
Location
Miramar
Start date
Participants
Who Replied
Replies
23
Views
2,487
Last reply date
Last reply from
mikeizo
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top