SOLD mtx 4 channel amp

  • 3
    Participant count
  • Participant list

jrgreene1968
10+ year member

Senior VIP Member
i have a mtx 6304 4 channel amp, works perfect, looks are probably 8 out of 10, ****SOLD******

here is a link to specs ...110.00...shipped to lower 48

http://www.mtx.com/caraudio/archive/thunder6304.cfm

DSC00180.jpg


DSC00179.jpg


 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
784
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
159

About this thread

jrgreene1968

10+ year member
Senior VIP Member
Thread starter
jrgreene1968
Joined
Location
East Texas
Start date
Participants
Who Replied
Replies
10
Views
744
Last reply date
Last reply from
jrgreene1968
20240519_201344.jpg

audiobaun

    May 19, 2024
  • 0
  • 0
Screenshot_20240519-213549.png

1aespinoza

    May 19, 2024
  • 0
  • 0

New threads

Top