mint US AMPS AX-TU600c hybrid tube amp 2 channel

gentlejax
10+ year member

CarAudio.com Veteran
Item(s) for Sale:us amps made in USA ax-tu600c

 

Type: AXTU600C Tube 600 Watts Class A Car Audio Amplifier

Total RMS Power: 600W, Dynamic power 1200W

RMS Power: 165W x 2 @ 4 Ohms RMS

RMS Power: 300W x 2 @ 2 Ohms RMS

RMS Power: 600W x 1 @ 4 Ohms Bridged RMS

Bridgeable: Yes

Fuses: None

Efficiency: 70% @ 4 Ohms, 65% @ 2 Ohms

Crossover Control: High-Pass 50-500Hz, 12dB / Octave Butterworth

Crossover Control: Low-Pass 50-250Hz, 24dB / Octave Butterworth

signal In: Low Level 1 rca Pair

power Connector: Block / 1AWG

speaker Connector: Screw Terminal Barrier Strip 8-18 AWG

Heatsink Type: Aluminium

Cooling: Convection

Remote Control: Yes

Indicators: Power, Protect

Class: Tube A/B

Frequency Response: 20Hz-20KHz +/- 1dB

Weight: 7KG

Dimensions: 69 x 280 x 409 mm

Item(s) Description/Condition:mint . no manual. in box that RE Audio shipped to me. mint

 

 

 

 

Price:$250

 

 

 

 

Shipping and Miscellaneous Item Information:

 

 

 

 

Item Pictures:

 



 



 

 



 







 





 

 

 

 

 

 

 

 

 

 

 



(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

 
supposedly underated a little...its very small and very efficient. made in USA like the tube. matches as well. I like it but not married to it.

I have run it @ 1ohm briefly but currently running it at 4ohm

Type: AX600DE Monoblock 1400 Watts Class DE Car Audio Amplifier

Total Power: 700W RMS, Dynamic Power 1400W

RMS Power: 250W x 1 @ 4 Ohms RMS

RMS Power: 400W x 1 @ 2 Ohms RMS

RMS Power: 700W x 1 @ 1 Ohms RMS

Bridgeable: No

Fuses: None

Efficiency: 86% @ 4 Ohms, 84% @ 2 Ohms, 76% @ 1 Ohms

Crossover Control: Low-Pass 40-250Hz, 24dB / Octave Butterworth

Subsonic Filter: 30Hz, 12dB / Octave

Signal In: Low Level 1 RCA Pair

Power Connector: Block / 4AWG

Speaker Connector: Screw Terminal Barrier Strip 8-18 AWG

Heatsink Type: Aluminium

Cooling: Convection

Remote Control: Yes

Indicators: Power, Protect

Class: DE

Frequency Response: 20Hz-20KHz +/- 1dB

Weight: 4KG

Dimensions: 69 x 280 x 231 mm

 
juancolchado may want it if you havent talked to him yet. last i heard, he was looking for another one to finish a matched set to install for active duty.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
439
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
2
566
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
0
847
You don't need two amps. The speakers come with crossovers to help protect the tweeters.
14
1K
Perhaps you changed something without mentioning it here? Maybe a loose turn on line? I dunno man...but we'll take it. Hopefully it keeps working. 👍
16
2K

About this thread

gentlejax

10+ year member
CarAudio.com Veteran
Thread starter
gentlejax
Joined
Location
Bossier City, La.
Start date
Participants
Who Replied
Replies
24
Views
5,340
Last reply date
Last reply from
gentlejax
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top