Wolkt
CarAudio.com Newbie
Would really appreciate advise on the following setup scenario:
Would the following setup work well on the JBL a754 amplifier (a754 specs - 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms), 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode):
Speakers:
JBL Club 605CSQ (95watts RMS @ 3 ohm), and
JBL Fuse Sub (separated under 2 X seats - 200watt RMS 4 ohm separated).
Idea is to wire as follows:
605CSQ in doors on a754 channels 1 & 2, and separated Fuse (under left & right seats) units on channel 3 & 4.
Connection Options:
1) 2 separate Fuse units on channel 3 & 4 - wired in series (8ohm) and connected bridged on channels 3 & 4, or
2) 2 separate Fuse units left & right - wired as left and right subs on channels 3 & 4
JBL Product Pages:
JBL Club a754 Amplifier- https://www.jbl.com/car-amplifiers/CLUBA754.html
JBL Fuse Sub - https://www.jbl.com/SUBWOOFER.html
JBL Club 605CSQ Speakers - https://www.jbl.com/car-audio-systems/CLUB605CSQ.html
Would the following setup work well on the JBL a754 amplifier (a754 specs - 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms), 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode):
Speakers:
JBL Club 605CSQ (95watts RMS @ 3 ohm), and
JBL Fuse Sub (separated under 2 X seats - 200watt RMS 4 ohm separated).
Idea is to wire as follows:
605CSQ in doors on a754 channels 1 & 2, and separated Fuse (under left & right seats) units on channel 3 & 4.
Connection Options:
1) 2 separate Fuse units on channel 3 & 4 - wired in series (8ohm) and connected bridged on channels 3 & 4, or
2) 2 separate Fuse units left & right - wired as left and right subs on channels 3 & 4
JBL Product Pages:
JBL Club a754 Amplifier- https://www.jbl.com/car-amplifiers/CLUBA754.html
JBL Fuse Sub - https://www.jbl.com/SUBWOOFER.html
JBL Club 605CSQ Speakers - https://www.jbl.com/car-audio-systems/CLUB605CSQ.html