how to...

[kwitcherbichin 10+ year member]

how to get an extra half cube to my next new box.

ok dimensions are 36 wide 23 deep and 18 tall. and i need an extra half a cube too get the correct airspace. any easy way to do this or a formula or something?

and help would be appreciated

Click to read more...

 

[*SlappinAzz*]

how to get an extra half cube to my next new box.
ok dimensions are 36 wide 23 deep and 18 tall. and i need an extra half a cube too get the correct airspace. any easy way to do this or a formula or something?

and help would be appreciated

Aeroports?

 

[kwitcherbichin 10+ year member]

i believe its going too be a slot port. im not sure cause pwk is designing the box and he said that i needed an extra half a cube to make the box right.

 

[O.G. D-Wet 10+ year member]

single external aero and invert ur sub(s)

 

[kwitcherbichin 10+ year member]

dont have room to invert... dont want an aero i wanna know how to add half of a cube to the dimensions i already have...

 

[chillin 10+ year member]

Add two inches to the width? That will raise it about .5cuf. Not sure if i understand the question. Are the dimensions you gave the maximum you can have? if so i think your ****ed. Otherwise do what i suggested.

the formula is multiply width by depth by hight. then divide by 1728 to get cubic feet from inches. In your case try adding inches to each side and see what you come up with.

 

[FenixAudio 10+ year member]

^^hes going to port it....you could use a tube port instead of a slot port. that will give you a little room depending on the Q of the box. what freq is he designing it for?