wikid
Junior Member
Hi New to the site
Someone suggested I get a set of these for my front speakers. First question are they a good choice?
I am putting them in a 2017 Toyota Tundra Crewmax . I already have a JL Audio 900/5 hd amp, JL fix 86, sub box that fits behind the seats that has (2) Image Dynamics 10" subs . I just need to add fronts (the hertz above was suggested and I will need a rear pair, but not sure what to get there.
Specs for the speakers
Power Handling: 300W Peak | Power Handling Continuous: 150W RMS | Impedance: 4-Ohm
Frequency Response: 40 ÷ 22,5k | Sensitivity: 92 dB SPL | Voice coil: 1”
Woofer size: 6.5” | Tweeter size: 1.14” | Woofer magnet: High density flux ferrite
Tweeter magnet: Neodymium | Woofer cone: Pressed-pulp cone with cotton fibers | Tweeter dome: Tetolon
Crossover type: 3 Way Passive Crossover | Crossover cut off: 450Hz - 5.5k Hz
I appreciate the help in advance .
I just joined and the random question still lists Obama as our current president
Someone suggested I get a set of these for my front speakers. First question are they a good choice?
I am putting them in a 2017 Toyota Tundra Crewmax . I already have a JL Audio 900/5 hd amp, JL fix 86, sub box that fits behind the seats that has (2) Image Dynamics 10" subs . I just need to add fronts (the hertz above was suggested and I will need a rear pair, but not sure what to get there.
Specs for the speakers
Power Handling: 300W Peak | Power Handling Continuous: 150W RMS | Impedance: 4-Ohm
Frequency Response: 40 ÷ 22,5k | Sensitivity: 92 dB SPL | Voice coil: 1”
Woofer size: 6.5” | Tweeter size: 1.14” | Woofer magnet: High density flux ferrite
Tweeter magnet: Neodymium | Woofer cone: Pressed-pulp cone with cotton fibers | Tweeter dome: Tetolon
Crossover type: 3 Way Passive Crossover | Crossover cut off: 450Hz - 5.5k Hz
I appreciate the help in advance .
I just joined and the random question still lists Obama as our current president