wheelert15
CarAudio.com Newbie
I have a question on the best way to utilize what I have. This is in a 08 Chevy Impala. My question is about
the crossovers and time alignment. My headunit is capable of both to some degree. Should I be using the
passive crossovers at all? Should I do away with the Dayton DSP? Any suggestions would be appreciated, I'm
new to the DSP, time alignment, and digital xovers. Below is what I have to work with.
Alpine ILXF-509 head unit
Rockfor Fosgate Power 800 4 channel
Taramps Smart3K mono
Pioneer GM-E360X4 Class A/B 4-Channel Bridged to rear deck (Sonys)
Sony 6 x 9 rear deck full range, just a pair I had no sure model
Rockfor Fosgate Power T5652 S Component Mids and Tweets, doors and pillars
Rockfor Fosgate Power Crossovers for components
Rockfor Fosgate P3D4 Loaded Sub Enclosure 2, 12's
Dayton DSP-408 Processor
2 runs of 0 gauge OFC wire
2 basically stock batteries
the crossovers and time alignment. My headunit is capable of both to some degree. Should I be using the
passive crossovers at all? Should I do away with the Dayton DSP? Any suggestions would be appreciated, I'm
new to the DSP, time alignment, and digital xovers. Below is what I have to work with.
Alpine ILXF-509 head unit
Rockfor Fosgate Power 800 4 channel
Taramps Smart3K mono
Pioneer GM-E360X4 Class A/B 4-Channel Bridged to rear deck (Sonys)
Sony 6 x 9 rear deck full range, just a pair I had no sure model
Rockfor Fosgate Power T5652 S Component Mids and Tweets, doors and pillars
Rockfor Fosgate Power Crossovers for components
Rockfor Fosgate P3D4 Loaded Sub Enclosure 2, 12's
Dayton DSP-408 Processor
2 runs of 0 gauge OFC wire
2 basically stock batteries