Help with headlights when the bass hits

On some songs my headlights dash lights disappear when the bass hits i am running a big system 1600 watts and my little camry cant handle all the power how do i fix this i was told caps **** and ruin alternators. I have heard high output alternator and or battery. but i kinda wanna just hook up a second battery i have a perfect spot under my hood for an additional battery right next to the alternator what should i do to stop the headlights from flashing!!!!

i am running 2 10" type rs and a hifonics hifi 1600 watt amp

 
i donno how many times this gets answered a day. #1- big 3 #2- 2nd batt. yours just drains it fast but then fills the batt back up so i don't think you need a new alt. but if you ever need to get a new alt, get a bigger one.

 
You dont need a high out alt, you need a second batt that is worth a shit. Wal-Mart has some cant think of the name right off the top of my head, but they are close to 100ah each, and are under $75. Guarantee it will take care of the problem.... They are wet cell's so make sure it is under your hood, you put one inside your ride, and you will probably get sick...

 
How large is your stock alt? 1600 watts is well over a 100 amps of draw at 12 volts. Yes, that's peak, but even the average draw over time will still be significant. If the discrepancy between draw and supply is great enough, adding a second batt will merely prolong the problem.

But all this being said, your personal listening habits also factor in to average current draw, how often the stereo is left on while driving to allow the batts to recharge, even by how far the owner's average drive time is. So if you learn nothing else form my post, its that answering the question of if you need an alt or not is very complicated, and virtually impossible for us to answer unless the discrepancy makes the answer obvious.

Adding the second batt, if you decide to do so, would be best placed in the rear, near the amplifier(s). Voltage drop will decrease due to those peak power demands from the amplifier drawing mainly on the close batt, providing less line-loss due to less wire between the power draw and a power source.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Got it figured out! Thankfully a friend just found out about KunKonceptz UBT-20 terminal adapters that allow multiple connections to my type 94...
3
467
Turn the volume completely down and operate ot normally. This is to see if it is the built in amplifier that is shutting down. If the radio does...
1
397
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
531
Dammned good speakers. Just pass up the CL series,and you will be pleased with CDT speakers. I still enjoy all mine. Polk MM series and Infinity...
4
563

About this thread

D_collins916

Junior Member
Thread starter
D_collins916
Joined
Location
Citrus heights ca
Start date
Participants
Who Replied
Replies
6
Views
3,218
Last reply date
Last reply from
Imtjnotu
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top