SOLD fs: 2 Kenwood 12" shallow mount Subs and Ken Amp

ssackett
10+ year member

Evo Audio
4,863
0
CA
Got 2 like new 12" Kenwood Excelon KFC-XW1200F SVC4 shallow mount subs and a Kenwood 8104d mono block amp. Also have custom made sealed box that fits under the rear seats of a 2008 Quad Cab Chevy/GMC truck. Only local pick up for the enclosure. PM me for price.

$125 shipped for each sub plus pp fee

$115 shipped for the amp plus pp fee

Amp Specs:

Mono subwoofer amplifier

300W x 1 at 4ohms (20-200Hz 0.5%THD)

500W x 1 at 2ohms (100Hz 0.8% THD)

CEA-2006 compliant

Bass Boost f=40Hz Gain 0 - 18dB

Class D Amplifier Circuit

Aluminum Die Cast Heat Sink

Power MOS-FET Switching Power Supply

Speaker Level Input and outputs

Signal Sensing Turn-On

2ohm Load Capability

Line Output Terminals (RCA) for Extension

Blue Illumination

Gold Plated Power & Speaker Terminal

Built-in Variable Low-pass Filter 50-200Hz (24dB/oct)

Built-in Infrasonic Filter 15/25Hz (18dB/oct)

Fuse rating: 40A x 1

8-gauge power and ground leads recommended - wiring and hardware not included with amplifier

11-1/16"W x 2-3/8"H x 9-7/8"D

FILE0177.jpg


FILE0180.jpg


FILE0179.jpg


FILE0181.jpg


FILE0183.jpg


** Pics uploading now

 
How did that amp treat ya?
I got the same one pushing 2 12" Kenwoods, mine shuts off a lot, did yours ever do that?

You need to first check your ground, your positive lead, and the 12V turnon from your head unit. If that is all checked then I'm guessing your amp turns off when you really crank the volume, then turns back on when you lower it? If that's the case, then you have your subwoofers wired for too low of an impedance for that amp. Keep in mind, if your amp is 2 ohms stable in stereo, its only 4 ohms stable bridged //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Best of luck.

 
Yeah ill just sale the subs. Ill have to take them out later tonight or tomorrow and snap some shots. They are like new.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I have 2 more questions about the Kenwood DDX9907XR / DMX907S radios. 1. If I am listening to a source and have that particular source displayed...
0
136
Honestly I don't think it would be hard for them to make it where you use android auto AND your own music source. They made it able to do so...
5
341
@Deiimos Hit it on the spot from the beginning of a bad ground. Excellent! Im happy to hear that you went through some procedures to locate the...
20
852
I got it to work, I was plugging in the subwoofer while the amp had power. I unhooked the remote turn on lead, then all speakers plugged in, then...
4
647

About this thread

ssackett

10+ year member
Evo Audio
Thread starter
ssackett
Joined
Location
CA
Start date
Participants
Who Replied
Replies
101
Views
3,737
Last reply date
Last reply from
ssackett
1715565471722.png

Doxquzme

    May 12, 2024
  • 0
  • 0
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0

New threads

Top