Dragonfish
Junior Member
I picked up a Fosgate P1S2-8 and I'm working on a slotted box for it. The specs call for a .65 ft3 box but when I put it into WinISD I found I got more output in a 1.5 ft3 box with the port tuned to 40 hz. Would you mind looking at this and let me know if it looks ok? This is my first time designing a box and I followed the sticky at the top of this forum.
1.5 ft3 adjusted to 1.85 ft3 for port and driver displacement
2" x 12" x 23" port
Driver info:
FS: 40
Re: 1.8
Le: 1.16
Qms: 2.88
Qes: .48
Qts: .54
Vas: 12
Sd: 211
1.5 ft3 adjusted to 1.85 ft3 for port and driver displacement
2" x 12" x 23" port
Driver info:
FS: 40
Re: 1.8
Le: 1.16
Qms: 2.88
Qes: .48
Qts: .54
Vas: 12
Sd: 211