amp swap help!!!

  • 3
    Participant count
  • Participant list

code33

CarAudio.com Newbie
5
0
texas
ok guys so I'm replacing my amp and have the negative unplug from the battery , right now I have all the wires in cap with electrical tape at the ends . my question is is it safe to plug everything back together oh and I forgot to mention I have a 1.5 capacitor .
 
ok guys so I'm replacing my amp and have the negative unplug from the battery , right now I have all the wires in cap with electrical tape at the ends . my question is is it safe to plug everything back together oh and I forgot to mention I have a 1.5 capacitor .

Throw the capacitor away and rehook everything up saving the battery negative for last
 
Activity
No one is currently typing a reply...

Similar threads

Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
190
No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
389
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
487
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
777
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
562

About this thread

code33

CarAudio.com Newbie
Thread starter
code33
Joined
Location
texas
Start date
Participants
Who Replied
Replies
3
Views
2,257
Last reply date
Last reply from
KicktheSDbasshead
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top