Amp suggestion

  • 3
    Participant count
  • Participant list

Peedib89
10+ year member

Junior Member
12
0
NY
Ok guys heres the deal. Im going to have 2 Diamond Audio D-312's in a ported box that i will probally get the plans from fischer customs for. Its gunna be tuned to around 33-35hz. Im thinking about getting the Memphis MCD 1100.1. You guys think this would be a good match?

 
Ok guys heres the deal. Im going to have 2 Diamond Audio D-312's in a ported box that i will probally get the plans from fischer customs for. Its gunna be tuned to around 33-35hz. Im thinking about getting the Memphis MCD 1100.1. You guys think this would be a good match?
I've run this set up before. Tune the box to 32hz and put a D3 1000.1 on it. You'll love it.

 
^^^ thanks man

lyttleveit. do u happen to remember how many cubes the box was, and if it was a comon chamber or each sub had its own?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Great bang for the Buck/ Have (2)2ks and a 150.4. great amps for the Coin Thus far.A little head room doesnt usually hurt...
5
2K
Subs play to the beat with gain low but if I turn it up my subs play loud unwanted never ending bass that is constant and wont stop until I turn...
0
29
You have a blown cap in the amp more than likely. Had the same thing happen to a soundstream amp.
1
42
Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
229

About this thread

Peedib89

10+ year member
Junior Member
Thread starter
Peedib89
Joined
Location
NY
Start date
Participants
Who Replied
Replies
4
Views
475
Last reply date
Last reply from
Peedib89
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0
445387485_1610561083127261_6762343569694877677_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top