Bug420247
CarAudio.com Newbie
So I have 2 x 12D1 Rockville Destroyers. And I was contemplating on putting them in a 4th order bandpass enclosure tuned to 30hz. I want the entire enclosure to be close to 7 ft3. I have the dimensions I want… but every time I try to use box design. Software. They never have the specific box type or the subs wired the way I do… so I cannot get an accurate tune. Does anyone have any suggestions?
So here are some of the issues:
1- Not enough T/S parameters listed on the Rockville site to plug into the software. Or the parameters listed are not what the software is asking for.
2- The software does not have an option for the way I am wiring my drivers. (Which is series-parallel)
3- Not getting port velocity feedback, x max feedback, or spl feedback on WinISD
So here are some of the issues:
1- Not enough T/S parameters listed on the Rockville site to plug into the software. Or the parameters listed are not what the software is asking for.
2- The software does not have an option for the way I am wiring my drivers. (Which is series-parallel)
3- Not getting port velocity feedback, x max feedback, or spl feedback on WinISD