46panel's new setup...3 18" Death Penalties walled on 2 Sundown 3000's

um.. 1. are those the rims off the dodge nitro or srt-8 jeep.

2. those tires are skinny as hell.. Have you checked the max weight for them? they don't seem safe
Just checked them and they say extra load then says max is 2150 lbs so I would assume that is times 4 which would be 8600 lbs which I wouldn't be over, so thats good. Unless that number is for all 4 but i dunno???

Looks awsooommme!
Thanks man

 
Added another set of 5.25's up front

edd02987.jpg


Then finally did my best hairtrick out of every system I've had


 
sweet looks awesome you should throw something in that panel truck see how loud you can get it but then again its a classic not too many people throwing loud systems in classics
Have you seen Danny Hayes's panel van....2 DDZ 18s in a fourth order doing 180+ //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

OP..looks nice...and loud!

 
Looks good man. Have you metered it yet? Also what part of Michigan are you from?
Thanks man and no I haven't got it on the termlab. I'm from cheboygan which is way up north by the bridge. But I go to college down in Saginaw which is about midway down.

Have you seen Danny Hayes's panel van....2 DDZ 18s in a fourth order doing 180+ //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif
OP..looks nice...and loud!
Thanks and I'll def have to check out that panel.

 
O nice, but yea honestly a HUGE improvement. With my 3 18" BL's I hit a 152 on an epic 160 then hit a 151.1 on the termlab with that setup. Went to the 4 18's and actually the epic 160 gave me a 151 (because the box was way to small and not good) Haven't got the new setup on a termlab as it has only been playing for 2 days but on the epic 160 I hit a 154 with brand new not broken in subs and it is just so much louder to the ear and moves ALOT more air so yea I am extremely pleased //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Ha thanks man!

Well I do have a little something in there, but just two RF T1 12's on a T10001Bd, still sounds good.

001-1.jpg


Um the rims are enkei lm1 5s and no I have not checked the weight but yea thats good thinking I will definitely do that.
stabin' cabin

 
Thanks guys. I'm finally content with it and was able to see first hand that more subs is always not better because going from the 4 18" BL's in a super small box to the three DP 18's in proper size was a HUGE improvement.

 
I'd like to have that panel truck. It has big potential...
Thanks yea maybe someday I'll do more of a system with it but for now I like it and will just have the explorer get destroyed.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

This would go a long way to alleviating the dimming issue, up to around 4000 watts. It can handle 100A continuous and up to 285A 7 second burst...
6
702
I had some 9500 series 12s by MTX that were some slamming subs!! Should have kept those along with those torpedo RE XXX 12s
15
1K
I am doing an all JL audio instal on my new F250 SD . I'm using a Audio Control LC 5i Pro with a JL Audio XDM 700/5 and C3-650's in all 4 doors...
7
983
Id sit down and figure out exactly what all you will be installing for amperage consumption and add another 10-15% amperage useage on top of that...
21
2K

About this thread

46panel

10+ year member
CarAudio.com Elite
Thread starter
46panel
Joined
Location
Michigan
Start date
Participants
Who Replied
Replies
41
Views
4,205
Last reply date
Last reply from
46panel
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0

New threads

Top