Goindef154 5,000+ posts
Nothing
I'm selling my current setup and changing things up a bit. I don't have pictures yet because most the stuff is still in my car, but I should be able to pull it all out tonight and post up pictures. I'll just get right down to it...
---First I have 2 DD 3515's with the C motor and they're D4 ohm, I've had these things for about 4 years and I took them to a few comps almost 3 years ago but since then they've only been used for daily driving, they work flawlessly and look brand new still. With the exception of one of them, after the last comp I went to I was putting the sub back in and the drill slipped and punctured a hole in the cone, it has not affected the performance what so ever. Like I said that happened 3 years ago and I've been using it everyday since then and it works just fine, I will definitely get pictures of that tonight for everyone. I have ordered shipping boxes from DD just 10 minutes ago and hopefully they'll get here within a week or so. I'm going to be asking $240 shipped obo for each one, if you want both I will obviously cut you a deal.
---DD C4a Amp, here are the specs: http://www.ddaudio.com/dd/amp/amp.asp?series=C I bought this off Louisian_CRX about 5 months ago iirc and I'm not sure how long he had it for. Off the top of my head I don't think they're are scuffs on it, but it's been under my box in my truck for the last 4 months, so it might and I just don't remember, but I will definitely get pictures of it tonight. It works flawlessly and has been a great amp to own. I'll start off at $275 shipped obo.
---I have an Orion XTRPRO 2400 that I also bought off of Louisiana_CRX. It does 1x1200 at 4 ohm, 1x2400 at 2 ohm and when I bought it Dave said it does 3600x1 at 1 ohm and I've been running it at 1 ohm for the last 3 or so months and I have not had one problem with it. I did have an orion 2500D before this one and it is definitely louder now than it was when I had the 2500D, so I have no reason in doubting that it does 3600 at 1 ohm. This has been a great amp, performance is a 10/10 and cosmetically I would give it a 8/10 only because a few of the screw holes have broken and I had to drill new ones on the lip of the amp, other than that, it is in perfect shape and has never been abused. I've seen a few of them go for around $500, so I'll ask $500 shipped obo, I'm pretty firm on that but all offers are welcome.
Here's where I got the specs from: http://ampguts.realmofexcursion.com/Orion_XTR_2400_Pro/
---I also have about 150 ft. left of a roll of Red 8 gauge lightning audio wire. I'll sell that for $0.45 a foot and I'll reduce the cost obviously if you buy more.
---Finally I have about 15ft. of Yellow 4 gauge welding supply wire, that I'll sell for $20 obo.
That's all I can think of for now, if I find anything else I'll just throw it on here. Again I should have everything out of my truck tonight, I have school until 6 and I will get home around 7 and start taking everything out, shouldn't take that long. And I will have pics up as soon as everything is out with my name and date. If you have any questions please don't hesitate to ask and I will gladly answer them. All prices are pretty firm unless they say OBO. The only trades that I'm taking right now are: AQ1200D, 1 AQ SD208, GREY wire either 1/0 or 4 gauge and 1/0-4 gauge wire reducers.
I have ref's on here and at soundpresuure.com, I've bought and sold from a few people on here but I can't think of their names other than Louisiana_CRX, I have an ebay name under the same one that's on here with 100% 114 feedback for buying and mostly selling and I do accept paypal and have about 75 verified buyers. Thanks for looking!!
---First I have 2 DD 3515's with the C motor and they're D4 ohm, I've had these things for about 4 years and I took them to a few comps almost 3 years ago but since then they've only been used for daily driving, they work flawlessly and look brand new still. With the exception of one of them, after the last comp I went to I was putting the sub back in and the drill slipped and punctured a hole in the cone, it has not affected the performance what so ever. Like I said that happened 3 years ago and I've been using it everyday since then and it works just fine, I will definitely get pictures of that tonight for everyone. I have ordered shipping boxes from DD just 10 minutes ago and hopefully they'll get here within a week or so. I'm going to be asking $240 shipped obo for each one, if you want both I will obviously cut you a deal.
---DD C4a Amp, here are the specs: http://www.ddaudio.com/dd/amp/amp.asp?series=C I bought this off Louisian_CRX about 5 months ago iirc and I'm not sure how long he had it for. Off the top of my head I don't think they're are scuffs on it, but it's been under my box in my truck for the last 4 months, so it might and I just don't remember, but I will definitely get pictures of it tonight. It works flawlessly and has been a great amp to own. I'll start off at $275 shipped obo.
---I have an Orion XTRPRO 2400 that I also bought off of Louisiana_CRX. It does 1x1200 at 4 ohm, 1x2400 at 2 ohm and when I bought it Dave said it does 3600x1 at 1 ohm and I've been running it at 1 ohm for the last 3 or so months and I have not had one problem with it. I did have an orion 2500D before this one and it is definitely louder now than it was when I had the 2500D, so I have no reason in doubting that it does 3600 at 1 ohm. This has been a great amp, performance is a 10/10 and cosmetically I would give it a 8/10 only because a few of the screw holes have broken and I had to drill new ones on the lip of the amp, other than that, it is in perfect shape and has never been abused. I've seen a few of them go for around $500, so I'll ask $500 shipped obo, I'm pretty firm on that but all offers are welcome.
Here's where I got the specs from: http://ampguts.realmofexcursion.com/Orion_XTR_2400_Pro/
---I also have about 150 ft. left of a roll of Red 8 gauge lightning audio wire. I'll sell that for $0.45 a foot and I'll reduce the cost obviously if you buy more.
---Finally I have about 15ft. of Yellow 4 gauge welding supply wire, that I'll sell for $20 obo.
That's all I can think of for now, if I find anything else I'll just throw it on here. Again I should have everything out of my truck tonight, I have school until 6 and I will get home around 7 and start taking everything out, shouldn't take that long. And I will have pics up as soon as everything is out with my name and date. If you have any questions please don't hesitate to ask and I will gladly answer them. All prices are pretty firm unless they say OBO. The only trades that I'm taking right now are: AQ1200D, 1 AQ SD208, GREY wire either 1/0 or 4 gauge and 1/0-4 gauge wire reducers.
I have ref's on here and at soundpresuure.com, I've bought and sold from a few people on here but I can't think of their names other than Louisiana_CRX, I have an ebay name under the same one that's on here with 100% 114 feedback for buying and mostly selling and I do accept paypal and have about 75 verified buyers. Thanks for looking!!