Which amp for 3 RF HX2?

[ViCk-BuMp 10+ year member]

Which amp should be enough to make 3 HX2(1000Watts peak) bump a lot? or do I need more than 1 amp?

Click to read more...

 

[indosia 10+ year member]

If you can afford it, one amp per sub is ideal. Are they dvc?

 

[ramos 5,000+ posts]

I would suggest getting the dual 2ohm HX2's and wiring them just like this for a 1.34ohm mono load. And powering them with a bd1500.1. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[indosia 10+ year member]

My friend has 2 hx2 12s hooked up to a bd 1000.1 and it hits hard, but sounds like shit.

 

[bumpin_blazer 5,000+ posts]

hey ramos now would you have used a very similar setup to that a while back?? i thought i read one time that you used to run HX2's but i'm not sure and yeah a bd1500.1 would be a good amp for those 3 subs and would hit VERY hard. oh and yes almost all RF subs sound dirty unless you are a pro box builder and design one for SQ.

adam

 

[indosia 10+ year member]

Anyone can build a sealed box, and those are said to have good sound quality. Untill you turn the volume up high and it distorts, but good transients. I thought it was the class d amp that made em sound bad, but i guess it was the speakers.

 

[ramos 5,000+ posts]

Originally posted by bumpin_blazer hey ramos now would you have used a very similar setup to that a while back?? i thought i read one time that you used to run HX2's but i'm not sure and yeah a bd1500.1 would be a good amp for those 3 subs and would hit VERY hard. oh and yes almost all RF subs sound dirty unless you are a pro box builder and design one for SQ.

 

adam

Yes sir. Identical, and I still have them. THey are just taking a vacation in a friends car currently //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif