2003 Mazda 6s Build Log!

[x2o 10+ year member]

nice

Thanks

I'm either going to try a lower tuned box, or going to go with a new build. I'm going to do either 6 10's or 12 8's off of the same 3000 watts november-december if I can't get this MT sounding how I want it to //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[MikeyB 5,000+ posts]

Play around with the box. You should be able to get a nasty low end outta that setup.

What are the specs on the current enlcosure? Size, tuning, port area.....

I would also recommend putting the sub closest to the left side in the box you have now. Theres a big pocket of wasted space right now and it would do better on the other side //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[x2o 10+ year member]

Play around with the box. You should be able to get a nasty low end outta that setup.
What are the specs on the current enlcosure? Size, tuning, port area.....

I would also recommend putting the sub closest to the left side in the box you have now. Theres a big pocket of wasted space right now and it would do better on the other side //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

The current enclosure is 4.1 cubes at 35hz after displacement. I heard it didn't matter where the sub went as it will use all of the airspace regardless, so I put it all the way towards the right for a visual balance. //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif.

Port area is ummmm 60ish sq inches. I think it came out to 58 sq in.

Yeah eventually I'll try building another box, but I wanna enjoy it as is for a bit. //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

Thanks for all the suggestions //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[I like FI 10+ year member]

i have simmilar system, 15"btl of mmats 3500.1, but im pretty sure mine is louder.



Come out to towershops and we can listen to eachother's system./

 

[Dyme_a_Duzin 10+ year member]

Nice build and vids.

 

[Low_e_Red 10+ year member]

I would also recommend putting the sub closest to the left side in the box you have now. Theres a big pocket of wasted space right now and it would do better on the other side //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Thats not true. If anything its better there than on the other side. If it was on the other side, you could have cancellations from the port and the sub.

 

[x2o 10+ year member]

Thats not true. If anything its better there than on the other side. If it was on the other side, you could have cancellations from the port and the sub.

Hm good to know, cancellation is too confusing for my blood.

 

[Apocalypse boy 10+ year member]

//content.invisioncic.com/y282845/emoticons/wave.gif.002382ce7d7c19757ab945cc69819de1.gif

 

[x2o 10+ year member]

//content.invisioncic.com/y282845/emoticons/wave.gif.002382ce7d7c19757ab945cc69819de1.gif

//content.invisioncic.com/y282845/emoticons/bigwave.gif.16324171cad2db62cf4f16568b038478.gif

 

[I like FI 10+ year member]

//content.invisioncic.com/y282845/emoticons/goldcup.gif.fed6f294523aaacf5ee40f0193e776f8.gif Me!

 

[aggybong 10+ year member]

So did those PGs fit without any mods? Looks like you put the tweets in the door, but would they have worked in the pillars?

 

[LDW3RD 10+ year member]

Good job.

 

[x2o 10+ year member]

So did those PGs fit without any mods? Looks like you put the tweets in the door, but would they have worked in the pillars?

The PG tweets were a bit bigger than the stock tweets, and I couldn't get them to fit inside the pillar pod that came without hacking it up and making a different mounting bracket, so I figured I'd just throw em in the door panel.

Good job.

Thanks! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[mazdakid 5,000+ posts]

try a smaller box and tune it to about 32hz

 

[x2o 10+ year member]

try a smaller box and tune it to about 32hz

Yeah next time I'm planning on tuning it to like 30-32.

I moved it further back in the trunk though and it hits the lows MUCH better, still could get a bit lower though.

And as for the size of it, it seems everyone that ran the 15 MT had from like 3.9-4.2, so I figured I'd do the same, lol.