keep_hope_alive
Premium Member
Acoustics Engineer
- Thread Starter
- #31
The trunk floor is very resonant and in need of a lot of treatment.
After full coverage of CLD, the floor is very dead.
Then I covered the floor with CCF from my stock of Ensolite that I’ve had for a while.
I also treated the bottom of the rear deck with CLD
https://hosting.photobucket.com/images/e128/phat_funky_beats/20231028_004210.jpg/img]
Then I covered it with CCF in order to hide the silver deadener since the rear deck is visible.
[img]https://hosting.photobucket.com/images/e128/phat_funky_beats/20231028_012008.jpg
With the side panels fitted in place, the scope of CCF is sufficient, even though it’s not a perfect finish, it is hard to get a seamless install.
https://hosting.photobucket.com/images/e128/phat_funky_beats/20231028_013631.jpg[img]
And here is a first look at where I plan on mounting the amps, a MV600/6i and a MV1000/1 with the MVi Hub.
[img]https://hosting.photobucket.com/images/e128/phat_funky_beats/20231028_013350.jpg/img]
![20231027_200929.jpg](/proxy.php?image=https%3A%2F%2Fhosting.photobucket.com%2Fimages%2Fe128%2Fphat_funky_beats%2F20231027_200929.jpg&hash=b36b59ac80f54dff4fe0b9919571a8fe)
![20231027_200931.jpg](/proxy.php?image=https%3A%2F%2Fhosting.photobucket.com%2Fimages%2Fe128%2Fphat_funky_beats%2F20231027_200931.jpg&hash=4d7e1b17e66cf64c2e1eaea7c7e4bb0e)
After full coverage of CLD, the floor is very dead.
![20231027_204209.jpg](/proxy.php?image=https%3A%2F%2Fhosting.photobucket.com%2Fimages%2Fe128%2Fphat_funky_beats%2F20231027_204209.jpg&hash=3cf2b72ed098335a8076a48c6f6db4c2)
![20231027_204155.jpg](/proxy.php?image=https%3A%2F%2Fhosting.photobucket.com%2Fimages%2Fe128%2Fphat_funky_beats%2F20231027_204155.jpg&hash=03a1300d57fcdd7c20d6685fcd909e3f)
Then I covered the floor with CCF from my stock of Ensolite that I’ve had for a while.
![20231028_011955.jpg](/proxy.php?image=https%3A%2F%2Fhosting.photobucket.com%2Fimages%2Fe128%2Fphat_funky_beats%2F20231028_011955.jpg&hash=77d347c1598e48522976c42d068ef56b)
I also treated the bottom of the rear deck with CLD
https://hosting.photobucket.com/images/e128/phat_funky_beats/20231028_004210.jpg/img]
Then I covered it with CCF in order to hide the silver deadener since the rear deck is visible.
[img]https://hosting.photobucket.com/images/e128/phat_funky_beats/20231028_012008.jpg
With the side panels fitted in place, the scope of CCF is sufficient, even though it’s not a perfect finish, it is hard to get a seamless install.
https://hosting.photobucket.com/images/e128/phat_funky_beats/20231028_013631.jpg[img]
And here is a first look at where I plan on mounting the amps, a MV600/6i and a MV1000/1 with the MVi Hub.
[img]https://hosting.photobucket.com/images/e128/phat_funky_beats/20231028_013350.jpg/img]