Live activity Postings Gallery About Feedback Stats
-
-
Doxquzme replied to the thread LOW VOLUME ON MY SUB NEED HELP.Then get yourself one of these instead... -
Okay I’m going to replace and check the ground connection before anything else because I’m thinking that’s the issue
-
Doxquzme replied to the thread JVC KW-DB95BT.Translation: Hi Get someone here to do the update, this headunit with a flash usb downloads the files I need before update and stored in the usb...
-
Doxquzme replied to the thread Subaru Speaker Help.I run CDT ES and HD drivers too, nice stuff!
-
https://www.cdtaudio.com/cdtnew22/index.htm I'd look here instead of entry level from those brands. I've been running cdt HD series components...
-
Finally got the box built (the top is off so I can load the subwoofers in and do the wiring bc my car is at the mechanic shop) Thank you to...
-
Doxquzme replied to the thread Twister f4 560.Your going to have to read it a bit, looks like there are input options for stereo /mono too. I would think that in mono mode, it sums the two RCA...
-
-
-
Doxquzme replied to the thread LOW VOLUME ON MY SUB NEED HELP.So you have an 800 watt sub (1600 is a peak spec, ignore it) the SVR-10 - 800 RMS dual 2VC ohm wired in parallel for a 1 ohm load paired with an...
-
Doxquzme replied to the thread I hate it when it rains.DId you use grommets? IS it possible that the water is riding on the outside of the cable into the trunk? Which power fuse and where it is it?
-
So where the wire enters the cabin it is not chaffed or pinched? Has it happened more than once? What is the fuse rating and the amp's combined...
-
Doxquzme replied to the thread Inconsistent bass levels.Which Skar LOC, which SPL Audio amp and which Skar sub(s)?
-
Doxquzme replied to the thread LOW VOLUME ON MY SUB NEED HELP.I believe that the LC2i has a fixed subsonic filter at 33hz, that will affect the low end too. THe LCi2 pro has a set filter at 22 hz, better...
-
Doxquzme replied to the thread Twister f4 560.Here is the user manual https://www.samodelka.ru/pictures/data/f4.pdf
-
Doxquzme replied to the thread Twister f4 560.Sorry, was not aware that a pair of full range speakers was in the plan so yes, you can use it for a pair of full range speakers and a sub, that...
-
Doxquzme replied to the thread Torn between two speakers.I would not opt for the inexpensive Focal's (and I've used/use currently - their products extensively in both car and HT applications) and while a...
-
Doxquzme replied to the thread Twister f4 560.Generally speaker-ing, when mixing types, your A/B amps are used for mains. Class D is much more efficient. Since you are starting off with a 4...
-
Thanks so the amp is more of a speaker amp in this situation
-
Doxquzme replied to the thread 8 8” 4ohm dvc wiring.My brain hurts just looking at those diagrams. It's late so if anyone sees a problem with either of those, please feel free to chime in!
-
-
Doxquzme replied to the thread 8 8” 4ohm dvc wiring.Geez, my brain hurts. It's a series parallel configuration. You will need to run a 4x4 and parallel the two groups. 2 groups of 4 woofer...
-
-
Doxquzme replied to the thread Twister f4 560.That is a four channel class A/B amplifier that if bridged to 2 channels it puts out approximately 330 watts x 2. The problem is that your sub is...
-
Doxquzme replied to the thread Skar wiring.The Sakr OFC wire is as good as any other for that price for sure, not talking about their amplifiers. If you have enough, dual 12 gauge runs are...
-
Yeah be careful how you go about this, while fires may be somewhat rare, it is a hazard if something isn’t done correctly and can happen...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
