I have two batteries running on at PDX 1100 it's wired at 4 ohms per channelon the monoblockAmerican bass 12 dual-voice-coil 2-ohm my headlights are still diming at high volume not alot but notiable
Activity
No one is currently typing a reply...
Similar threads
How have you verified that your alternator is making that much current under real world operating conditions in your vehicle?
- Started by Fabian12
- General Car Audio
yes they pull full power as soon as they are turned on
- Started by prizm01
- Wiring, Electrical & Installation
That would be close to 4000w rms give or take. I recommend a 75ah or larger AGM battery and a 240a or larger alternator. And you will need 2/0 or...
- Started by loudcaprice5
- Amplifiers
NADBL is the org that we get up here in the northeast, they do some shows in Ohio and upstate NY and into Canada, might be close-ish to you...
- Started by Blackout67
- Wiring, Electrical & Installation 2 3
Just the amplifiers use batteries to power it up. The HU are powered up by the car battery supplying 12 volts. The wiring harness...
- Started by stereoduck
- Head Units
About this thread
Latest topics
-
Help With Kenwood DDX9907XR / DMX907S - Kenwood Technical Support Can't Help
- Started by fadetoblack73
- Replies: 5
-
-
-
-
Amp Shorting out Infotainment Screen?- Started by Chris Morton
- Replies: 5