ALPINE BBX-F1200 4 CHANNEL CAR AUDIO AMPLIFIER (BBXF1200) WITH AMP KIT (BUNDLE PACKAGE)
R2AK4 4 GAUGE AMP KIT WITH PURCHASE
Get a Raptor R2AK4 4 Gauge 4 AWG Complete Amplifier Kit with your purchase.
17ft CCA power wire
3ft CCA ground wire
17ft RCA
ANL fuse holder with 100 amp fuse
Hardware included
For up to 1100W Systems
CCA (Copper Clad Aluminum)
Retail Cost: $49.99
GENERAL
- Amplifier Type: Class-A/B
- Channel Design: 4/3/2 Channel
- Thermal Control: Thermal Management Control
- Power Supply: DC-DC PWM Power Supply
- Power Supply Design: MOSFET Power
- Current Protection: Over-Current, Over-Voltage and Thermal Protection
- Crossover: Variable Low-Pass / High-Pass
- Green/red status LED
- 2 pair RCA pre-inputs
- Power Requirements: 14.4 V DC (11 V to 16 V)
- Input Sensitivity: 0.2 - 8.0 V
- Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
- Speaker Impedance: 4 or 2 Ω
- Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB
- Weight: 2.7 Kg
INSTALL
- Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
- Terminal Layout: Two-Sided
MAX POWER OUTPUT RATINGS
- Total Max Power: 600W
RMS POWER RATINGS
- Per Channel into 4ohms (≤1%THD+N): 4 x 50W
- Per Channel into 2ohms (≤1%THD+N): 4 x 70W
- Bridged into 4ohms (≤1%THD+N): 2 x 130W
SOUND TUNING
- Crossover Frequency (Variable, OFF/LPF/HPF Selectable)
1/2 Ch: LP/HP: 50Hz – 500Hz
3/4 Ch: LP/HP: 50Hz – 500Hz
- EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB (3/4 Ch only)
DIMENSIONS
- Footprint: 330 mm x 52 mm x 240 mm
