Fuse question....dont kill me lol

  • 3
    Participant count
  • Participant list

FineLinePimpin
10+ year member

Stuck in WV
So im trying to configure what size external fuse I'll need for my new wiring as my Scendo doesnt have internal fuses...

is Amp wattage x 13.8 + 20-30 = xxx  , which I saw on youtube, still a good/decent estimation?

so basically it would be 2250w rms  x  13.8 = 166.67 + 30 = 196.67 so I should have a 200amp fuse?

Sorry guys...lol..thank in advance

 
 Crescendo BC2000D and going for 1/0ga and doing a Big 3. 2003 Tahoe stock 135amp Alt for now but will be going with a big quality battery.
You should be just fine with a 250-300/amp ANL fuse at the battery with the 0ga wiring and follow up with proper fusing like a distro block at the amp/amps for fusing.Should be approx 20-25ft run of wiring for that vehicle, that alt should be plenty with the Big 3 in 0ga, and a decent Group 34/78 AGM battery for that amplifier, and a decent 75-100x4 mids and highs amplifier with a good ground

 
Thanks dude. I do have the bose system and wanted some mild updates for the doors which is why I went with the simple pioneer 3 ways for each door I was doing to run off the head unit. 

 
Thanks dude. I do have the bose system and wanted some mild updates for the doors which is why I went with the simple pioneer 3 ways for each door I was doing to run off the head unit. 
It should sound a little better than stock.I hope it all turns out well.You have plenty of room in that vehicle to do whatever youd like.I recommend to deaden the front doors if you have the time and funds.Its worth it.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would be cheaper, it might be easier to find a place to mount it, and you would have a ton of options if you just do two, 3 slot fuse holders...
4
575
My bad, yes, I read them each as having two 4ohm coils. The JBL diagram left a bit to be desired, IMO. ;) And a double yes, thought U was talking...
9
1K
I plan on getting the fuse to run as a front sub/midbass in my kick panels...I've heard they sound good but you definitely wont get mirror shaking...
3
2K

About this thread

FineLinePimpin

10+ year member
Stuck in WV
Thread starter
FineLinePimpin
Joined
Location
Bunker Hill, WV
Start date
Participants
Who Replied
Replies
7
Views
597
Last reply date
Last reply from
FineLinePimpin
Screenshot_20240424-005730.png

1aespinoza

    Apr 24, 2024
  • 0
  • 0
1000005348.jpg

Deepak Walia

    Apr 23, 2024
  • 0
  • 0

Latest topics

Top