Matt Ryan Robertson
CarAudio.com Newbie
- 1
2 orion hcca 152 15s
- Thread starter Matt Ryan Robertson
- Start date
- Replies 2
- Views 802
If you run one amp its gotta be half ohm or 2 ohms. You could run 2 amps @ 1ohm each or strapped.
Maybe keep it in the family an Orion HCCA 3k (amazing amp) @ half ohm? Do you know what your rising to?
Better have strongggg electrical for that.
Maybe keep it in the family an Orion HCCA 3k (amazing amp) @ half ohm? Do you know what your rising to?
Better have strongggg electrical for that.
The newer v2 5k Orion amps are rated at 12.6v like 3700watts at 2ohm and at 14 to 14.5 it should reach 4000 to 5000 at 2ohm load.
Last edited by a moderator:
Activity
No one is currently typing a reply...
Similar threads
Ive seen so many amps done this way over the years. Especially ones that had the Molex plugs and a couple others
- Started by Trey Champagne
- Amplifiers
Ok thank you i will try this.
- Started by Buzzsofttoy
- Amplifiers
I ran the Orion for about a year, then I bought the Taramps when I though the Orion broke. I found a knick in the Orion bass knob that was causing...
- Started by metalheadjoe
- Amplifiers
Ive had to install a 40 amp relay on the remote due to Popping issues on one my older Eclipse HUs, That ended up solving my popping issue. One...
- Started by metalheadjoe
- Amplifiers
I have created a post with all related information regarding the build under this link:
https://www.caraudio.com/threads/2000-camry-build.614208/
About this thread
