Jump to content

Recommended Posts

I have a question, and I need as much help as I can get.*

Here is what I have,*

Optima battery, Stock alternator of 150 amps, 4 gauge power and ground cable, 12 gauge speaker wire, Aftermarket stereo, Fosgate Punch 1000-1bd amplifier, and 2 12 inch l7 kickers. 2018 model.

 

When I higher my volume to like 3/4, both my subs rattle. Sounds like flapping rubber. I took my subs out of box, and they were still making that rattling/flapping sound. The subs are like 4 months old.*

 

I pressed on both sides of sub with fingers, and there was no scratching. Both subs are pretty firm. I checked the spider, and cone, and they both look perfect. All coils are on there right. No rips or cracks anywhere. I also tested all coils on both subs with multimeter, and all coils were reading at 3.7 and 3.8 ohms.

Is there anything else you guys recommend???

 

Oh yeah. And I also bought a Hifonics BRE20001.d and had it installed. Because I thought maybe my Fosgate amp wasn't working properly. But it's still doing the same thing. So it is doing same thing with both amps.

I bought the subs off a friend. He had them in his 2015 Camaro. He had them connected to his amp in his car. He let me hear them before I bought them. They sounded loud , and they didn't make any noise at all.

I bought them and I had them sitting for 2 months. Then I had them installed in my car. And that's when I heard them rattling.

Wat can it be???

Share this post


Link to post
Share on other sites

Wtf.

 

 

 

Oh he fixed it.

Edited by Popwarhomie

2016 Focus ST3 - Rockford DSR1 / PPI 900.4 / Silverflute 6.5" mids / Massive CT2 tweeters /Sundown Xv2 15"/ Taramps DSP3k / Stinger Roadkill / KNU wiring / Northstar SMSAGM80 /

2010 Focus coupe 157@46hz

Pioneer 80prs /(8) FU Audio 750 12"s / (4) FSD 2600s / (1) FSD 125.4 / (1) FSD 85.4 / (4) Crescendo UN-10" mids / (4) Crescendo FT1 tweeters / Stinger Roadkill / 2/0 EB flex wire / (5) Powerware 90AH batteries / DC 270XP Alt /

https://www.youtube.com/popwarhomie

too many freq at once, burn the coil, we all know, over 40-50hz, its all coilburning material.

Share this post


Link to post
Share on other sites

i think taylor swift is ugly.


Team Bang Hard Ohio Chapter

2013 Subaru Legacy B-Pillar

4 Crossfire v4 18s

4 Crossfire 4k's

2 Crossfire 2000.4s with Ampere JM1 Dsp

3 SINGER 270's + MI Solar 115ah 18v + 16.5ah 12v x2

Share this post


Link to post
Share on other sites
I have a question, and I need as much help as I can get.*

Here is what I have,*

Optima battery, Stock alternator of 150 amps, 4 gauge power and ground cable, 12 gauge speaker wire, Aftermarket stereo, Fosgate Punch 1000-1bd amplifier, and 2 12 inch l7 kickers. 2018 model.

 

When I higher my volume to like 3/4, both my subs rattle. Sounds like flapping rubber. I took my subs out of box, and they were still making that rattling/flapping sound. The subs are like 4 months old.*

 

I pressed on both sides of sub with fingers, and there was no scratching. Both subs are pretty firm. I checked the spider, and cone, and they both look perfect. All coils are on there right. No rips or cracks anywhere. I also tested all coils on both subs with multimeter, and all coils were reading at 3.7 and 3.8 ohms.

Is there anything else you guys recommend???

 

Oh yeah. And I also bought a Hifonics BRE20001.d and had it installed. Because I thought maybe my Fosgate amp wasn't working properly. But it's still doing the same thing. So it is doing same thing with both amps.

I bought the subs off a friend. He had them in his 2015 Camaro. He had them connected to his amp in his car. He let me hear them before I bought them. They sounded loud , and they didn't make any noise at all.

I bought them and I had them sitting for 2 months. Then I had them installed in my car. And that's when I heard them rattling.

Wat can it be???

did u check the surrounds haven't come unglued?, suppose u could be hearing tensil lead idk.. next time buy sundown, fu or ab xfl no more kicker..


KENWOOD X301 HU, PRECISION POWER Phantom 1000, FU 750 12, 2.1cfad ported, soundqubed 6.5" coax/doors, hp & lp xover on hu, AGM starting batt...

Boomin_tahoe said:
2 ohms rule

Share this post


Link to post
Share on other sites
i think taylor swift is ugly.

 

HOW DARE YOU!!!! TSWIFT IS LIFE!!!!

 

 

 

 

Come on CA.com.... Let the caps work....... 4th time editing this..


2016 Focus ST3 - Rockford DSR1 / PPI 900.4 / Silverflute 6.5" mids / Massive CT2 tweeters /Sundown Xv2 15"/ Taramps DSP3k / Stinger Roadkill / KNU wiring / Northstar SMSAGM80 /

2010 Focus coupe 157@46hz

Pioneer 80prs /(8) FU Audio 750 12"s / (4) FSD 2600s / (1) FSD 125.4 / (1) FSD 85.4 / (4) Crescendo UN-10" mids / (4) Crescendo FT1 tweeters / Stinger Roadkill / 2/0 EB flex wire / (5) Powerware 90AH batteries / DC 270XP Alt /

https://www.youtube.com/popwarhomie

too many freq at once, burn the coil, we all know, over 40-50hz, its all coilburning material.

Share this post


Link to post
Share on other sites
i think taylor swift is ugly.

u should be removed from the planet!! pack for the moon..


KENWOOD X301 HU, PRECISION POWER Phantom 1000, FU 750 12, 2.1cfad ported, soundqubed 6.5" coax/doors, hp & lp xover on hu, AGM starting batt...

Boomin_tahoe said:
2 ohms rule

Share this post


Link to post
Share on other sites

No they are glued perfect. Everything looks new in the sub.

Share this post


Link to post
Share on other sites

free air it and watch it, jeez. and if you shave taylor swifts head she looks like smiegle from lord of the rings.


Team Bang Hard Ohio Chapter

2013 Subaru Legacy B-Pillar

4 Crossfire v4 18s

4 Crossfire 4k's

2 Crossfire 2000.4s with Ampere JM1 Dsp

3 SINGER 270's + MI Solar 115ah 18v + 16.5ah 12v x2

Share this post


Link to post
Share on other sites
i think taylor swift is ugly.

 

Thems fightin' words right there son.


Refs = PapaGeno21, Goindef154, 92c1v1c, Disarmer, chemmins, 97maxima, kroid777, ithertz, basscort2009, hunterw, mar08052, appleyard, millimac247, jonny101abc, sundownz, cranberryyumyum, mig139, daboyfrumdabx, skateguy92, basebalz13.

Share this post


Link to post
Share on other sites

i would pay her good money to see how far she can get my tv remote up her *ss


Team Bang Hard Ohio Chapter

2013 Subaru Legacy B-Pillar

4 Crossfire v4 18s

4 Crossfire 4k's

2 Crossfire 2000.4s with Ampere JM1 Dsp

3 SINGER 270's + MI Solar 115ah 18v + 16.5ah 12v x2

Share this post


Link to post
Share on other sites
i would pay her good money to see how far she can get my tv remote up her *ss

 

Have mercy. I'd pay double.


Refs = PapaGeno21, Goindef154, 92c1v1c, Disarmer, chemmins, 97maxima, kroid777, ithertz, basscort2009, hunterw, mar08052, appleyard, millimac247, jonny101abc, sundownz, cranberryyumyum, mig139, daboyfrumdabx, skateguy92, basebalz13.

Share this post


Link to post
Share on other sites

Thanks for the unnecessary comments and help

Share this post


Link to post
Share on other sites

Any time dumbass.


Refs = PapaGeno21, Goindef154, 92c1v1c, Disarmer, chemmins, 97maxima, kroid777, ithertz, basscort2009, hunterw, mar08052, appleyard, millimac247, jonny101abc, sundownz, cranberryyumyum, mig139, daboyfrumdabx, skateguy92, basebalz13.

Share this post


Link to post
Share on other sites

Really?


Refs = PapaGeno21, Goindef154, 92c1v1c, Disarmer, chemmins, 97maxima, kroid777, ithertz, basscort2009, hunterw, mar08052, appleyard, millimac247, jonny101abc, sundownz, cranberryyumyum, mig139, daboyfrumdabx, skateguy92, basebalz13.

Share this post


Link to post
Share on other sites

What?


Refs = PapaGeno21, Goindef154, 92c1v1c, Disarmer, chemmins, 97maxima, kroid777, ithertz, basscort2009, hunterw, mar08052, appleyard, millimac247, jonny101abc, sundownz, cranberryyumyum, mig139, daboyfrumdabx, skateguy92, basebalz13.

Share this post


Link to post
Share on other sites
Thanks for the unnecessary comments and help

i think they messing with u because u made 3 post on the same Q..


KENWOOD X301 HU, PRECISION POWER Phantom 1000, FU 750 12, 2.1cfad ported, soundqubed 6.5" coax/doors, hp & lp xover on hu, AGM starting batt...

Boomin_tahoe said:
2 ohms rule

Share this post


Link to post
Share on other sites
Fuckboy

 

lol you have kickers so your not aloud to call anyone but yourself that.


Team Bang Hard Ohio Chapter

2013 Subaru Legacy B-Pillar

4 Crossfire v4 18s

4 Crossfire 4k's

2 Crossfire 2000.4s with Ampere JM1 Dsp

3 SINGER 270's + MI Solar 115ah 18v + 16.5ah 12v x2

Share this post


Link to post
Share on other sites
i think they messing with u because u made 3 post on the same Q..

 

assuming things at this hour is usually dangerous, there is no logic after 12, thats just science n stuff


Team Bang Hard Ohio Chapter

2013 Subaru Legacy B-Pillar

4 Crossfire v4 18s

4 Crossfire 4k's

2 Crossfire 2000.4s with Ampere JM1 Dsp

3 SINGER 270's + MI Solar 115ah 18v + 16.5ah 12v x2

Share this post


Link to post
Share on other sites

Well you got

 

---------- Post added at 01:36 AM ---------- Previous post was at 01:35 AM ----------

 

You got me. How sad

Share this post


Link to post
Share on other sites

Idk how we are going to help you figure out an odd sound when we can’t hear it.


2016 Focus ST3 - Rockford DSR1 / PPI 900.4 / Silverflute 6.5" mids / Massive CT2 tweeters /Sundown Xv2 15"/ Taramps DSP3k / Stinger Roadkill / KNU wiring / Northstar SMSAGM80 /

2010 Focus coupe 157@46hz

Pioneer 80prs /(8) FU Audio 750 12"s / (4) FSD 2600s / (1) FSD 125.4 / (1) FSD 85.4 / (4) Crescendo UN-10" mids / (4) Crescendo FT1 tweeters / Stinger Roadkill / 2/0 EB flex wire / (5) Powerware 90AH batteries / DC 270XP Alt /

https://www.youtube.com/popwarhomie

too many freq at once, burn the coil, we all know, over 40-50hz, its all coilburning material.

Share this post


Link to post
Share on other sites

I'll take the #6 combo with fries...


97 4 dr. Tahoe

Interstate battery

Alpine 9835

Polk Audio MM6501 comps

Soundstream Rubicon 1.2500D & 4.500 amps (New amps coming soon)

2 Sundown Audio X 15's Tuned @ 30Hz.

Knukonceptz/Royal Excelene wiring

Share this post


Link to post
Share on other sites

U said your subwoofer were sitting for acouple months. Did u use voice coil lubricate before installing them? After subwoofers sit for awhile you need to Lubricate the voice coil other wise you hear noises :wow:

Share this post


Link to post
Share on other sites

Create a free account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's free & easy!

Register a new FREE account

Sign in

Already have an account? Sign in here.

Sign In Now

×