Sound Deadener
- Thread starter soldiermedic
- Start date
- Replies 9
- Views 1K
soldiermedic
Popwarhomie 5,000+ posts
Team Lethal Pressure
The whole floor but not the roof at all?
Hertz Mafia
FEATHER RUFFLER
36sq ft roof
36sq ft floor
36sq ft doors
https://www.amazon.com/gp/aw/d/B01BKKZ1AM/ref=mp_s_a_1_2?ie=UTF8&qid=1525875666&sr=8-2-spons&pi=AC_SX236_SY340_QL65&keywords=noico+80+mil+sound+deadener&psc=1
https://www.amazon.com/gp/aw/d/B001HHP59G/ref=mp_s_a_1_1?ie=UTF8&qid=1525875732&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=stinger++sound+deadener&dpPl=1&dpID=512ZJEewe9L&ref=plSrch
These are two decent deadeners for the price
36sq ft floor
36sq ft doors
https://www.amazon.com/gp/aw/d/B01BKKZ1AM/ref=mp_s_a_1_2?ie=UTF8&qid=1525875666&sr=8-2-spons&pi=AC_SX236_SY340_QL65&keywords=noico+80+mil+sound+deadener&psc=1
https://www.amazon.com/gp/aw/d/B001HHP59G/ref=mp_s_a_1_1?ie=UTF8&qid=1525875732&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=stinger++sound+deadener&dpPl=1&dpID=512ZJEewe9L&ref=plSrch
These are two decent deadeners for the price
OP
soldiermedic 10+ year member
Noob4Life
- Thread Starter
- #4
Roof too. Thanks for the advice!
Jeffdachef 5,000+ posts
Gunz That Turn on Nunz
deaden the floor and doors. Use 1/2 plywood for the roof if you actually have a loud setup. If you are under 150 db then yeah deadener works fine.
Water Bear
Senior VIP Member
36 sqft for all 4 doors, I presume? I'm about to deaden the doors on my '02 Tahoe.
Hertz Mafia
FEATHER RUFFLER
Ya
Soldier
Keep in mind your mostly just adding weight.So less layers of the thicker sheets = more layers of thinner sheets in weight.I learned that I thought I saving money by buying cheaper/thinner damping but I had to use more and that was double the work.Thin dampener and thin house paint for me never again.
Yocom
Keep in mind your mostly just adding weight.So less layers of the thicker sheets = more layers of thinner sheets in weight.I learned that I thought I saving money by buying cheaper/thinner damping but I had to use more and that was double the work.Thin dampener and thin house paint for me never again.
Yocom
Last edited by a moderator:
Don't buy cheap *****. The results don't come with the cost.
Buy quality once and do it right the first time. Re-doing deadner is a pain in the ***.
Buy quality once and do it right the first time. Re-doing deadner is a pain in the ***.
BOOMINGRANDPA 5,000+ posts
WOLFRAM FTW
i only have cheap crap probably similar to the 80 mil in links above but i got 1 free sheet of gp audio mat (on trunk lid) and i promise all of you it is by far the best mat any of you have ever seen.. even you guys with $10k systems if u haven't seen this 250 mil thick stuff with like a felt top u should check it out.. *GP STFU V2 250mil 20 SQFT (5 sheets) - gp car audio
Activity
No one is currently typing a reply...
Similar threads
Very Nice!! I wished Id seen this two months ago. I ended up picking up a BNIB Sony XEC-1000. GLWS!! Ill chew on it a bit,and may pick it up??
- Started by -M@¥O_187-
- Car Audio Classifieds
Sweet!! Im happy to hear that it was not a major issue.!! Very nice man. Thanks for letting us know what the culprit was!!
- Started by slvx3x_
- Wiring, Electrical & Installation 2
Marine speakers would be Ideal as stated and Coax. Polks would work very well.
First choice of mine would be...
- Started by Tommywass
- General Car Audio
For me.. a compact amp that wouldnt take up a whole lot of room and not real expensive for a 350-600 rms sub@2ohms or even 1 ohm load id look at...
- Started by Krumy
- General Car Audio 2
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 9
- Views
- 1,062
- Last reply date
- Last reply from
- BOOMINGRANDPA
Latest topics
-
Jeep center console sub install issues.
- Started by vlusardi
- Replies: 1
-
-
-
-
Help With Kenwood DDX9907XR / DMX907S - Kenwood Technical Support Can't Help
- Started by fadetoblack73
- Replies: 5