RE Audio SE 10

I would reach out to RE Audio via email and ask them. They don't have a section for their discontinued stuff anymore.

I can check my bass box pro database when I get home from work in 9 hours lol

I thought I remember them being something like 1.5-2 @ 30-32hz.. I had one of the old SX models and they suggested a little higher tuning was like 1.5-2 @ 35hz.

Used to run 4 of them...

The best box would be 1.5 cu ft plus port ..port opening 18sq inches..22” long

Used to run 4 of them...

Click to expand...

What kind of numbers did that setup hit?

Never metered it...was only 2 ohms final ohm load. They don't like to be tuned low....so that enclosure there was like 32-33Hz tuning.

Never metered it...was only 2 ohms final ohm load. They don't like to be tuned low....so that enclosure there was like 32-33Hz tuning.

Click to expand...

I’d modified the port and tuned a little higher and metered them ..did you keep that box for different subs ? Or just change out completely?

Sold it.

TSP's for the 2003 version RE SE 10, I can also give TSP's for the 2008 version.



https://imgur.com/ZlGUiYl

BTW that sub is a prime candidate for a t line //content.invisioncic.com/y282845/emoticons/suave.gif.858fc102f7646e678ee8af7e1fbc41d1.gif

D2 specs:

Nominal Impedance -Znom: Dual 2 ohm

Thermal Power Handling -Pe: 1000 W

Force Factor -Bl: 21

Electrical Q Value -Qes: .29

Mechanical Q Value -Qms: 4.3

Total Speaker Q Value -Qts: .27

Free Air Resonance -Fs: 30.7 Hz

Equivalent Compliance -Vas: 21.8 liters

One-Way, Linear Excursion -Xmax: 22 mm

Efficiency - SPL 1W/1m: 85.2 dB SPL

Effective Piston Area -Sd: 310 cm^2

DC Resistance -Re: 1.9 ohm

Mounting Depth - 6”

Mounting Hole Diameter - 9.25”

Overall Diameter - 11”

Bolt Hole Circle - 10.125”

Motor Width - 6.5”

Motor Depth - 3.25”

Basket Depth - 2.75”

Displacement - .15 cu. ft.

Weight - 23 lbs.

Dual Composite 2-piece Cone

Rubbertek Foam Surround

Cast Aluminum Basket

Tork-Tite Terminal

3 " 8-layer Aluminum Voice Coil

FEA Optimized Motor Structure

Triple Stack Maganets

Progressive Spiders

Wrap around Rubber Gasket

Edit: This for the SX... I f'ed up again..