ChaseinBass
CarAudio.com Veteran
All my crap has been working for almost a year ? So I just gotta change it up some. So far this is my list.
1. First off remove most of it because I am getting rid of pop out quarter windows in the rear as they leak and flop all over the place when bass drops lol. So I gotta take it all out to get the interior panels out so I can take pop out window frames out and my glass guy will glue fixed windows in. Also add some deadener to those interior panels.
2. Add wiring for my alarm to add pin switches to tailgate and tool box as well as add glass breakage sensor and audio sensor that detects pressure change in cab if door or window is opened. And a few more tricks for security.
3 Rewiring mids and tweets to clean up wiring and adding 2pc xt60 connectors at every speaker so easier to remove and replace -not that you couldn't do that with other connectors but these looked cool so I got them. Add terminal blocks for each speaker run again easier for amp changes and maybe build a new amp rack and add an amp, maybe sundown 200.4 or another ppi 900.4 and bridge it like Jeff did and use it to power my 2 pr anarchy's. I may get a sound processor and go to a 3 way front stage but not sure just yet and if I can handle that lol . 4. Going to drop subs down to .5 I have been running the Taramps HD 15000 at 2 ohm so I should get a little more out of it at .5 or burn it the fug up lol !
5. Build my battery rack finally and add another battery, or maybe go lith batteries after first of the year. Add a lock down strap for tool box for better security.
6. Run three 0 gauge grounds from alternators to back battery bank and maybe new fuse block and move it. I have seen some cooler looking ones than mine.
7. Recover my door pods I made to house the anarchy's last year, glue is not holding in a couple spots.
8. Got to refinish A pillars as I have scratched a couple spots.
I will add pics from my phone in a separate post.
1. First off remove most of it because I am getting rid of pop out quarter windows in the rear as they leak and flop all over the place when bass drops lol. So I gotta take it all out to get the interior panels out so I can take pop out window frames out and my glass guy will glue fixed windows in. Also add some deadener to those interior panels.
2. Add wiring for my alarm to add pin switches to tailgate and tool box as well as add glass breakage sensor and audio sensor that detects pressure change in cab if door or window is opened. And a few more tricks for security.
3 Rewiring mids and tweets to clean up wiring and adding 2pc xt60 connectors at every speaker so easier to remove and replace -not that you couldn't do that with other connectors but these looked cool so I got them. Add terminal blocks for each speaker run again easier for amp changes and maybe build a new amp rack and add an amp, maybe sundown 200.4 or another ppi 900.4 and bridge it like Jeff did and use it to power my 2 pr anarchy's. I may get a sound processor and go to a 3 way front stage but not sure just yet and if I can handle that lol . 4. Going to drop subs down to .5 I have been running the Taramps HD 15000 at 2 ohm so I should get a little more out of it at .5 or burn it the fug up lol !
5. Build my battery rack finally and add another battery, or maybe go lith batteries after first of the year. Add a lock down strap for tool box for better security.
6. Run three 0 gauge grounds from alternators to back battery bank and maybe new fuse block and move it. I have seen some cooler looking ones than mine.
7. Recover my door pods I made to house the anarchy's last year, glue is not holding in a couple spots.
8. Got to refinish A pillars as I have scratched a couple spots.
I will add pics from my phone in a separate post.
Last edited by a moderator: