Sidebar

Single Sundown X 18 WALL Team GP

Reply
Jump to latest
GPcarAudio.com

GPcarAudio.com
Pro Seller

Supporting Vendor
1,062
2
Missouri
William came by a few weeks ago with this brand new sundown X 18 he acquired on a trade and had a few sheets of wood in his S10 extreme so my first thought was single 18 wall.

Reasoning, need a lot of cubic feet, and so the driver and passengers are not smashed into the dash.

The end result, both seats still remained in the same comfortable position.

Heres the beginning of the build, its not finished yet as he lives over an hour away, but its getting there.

20150815_195952_zpsusaqgue7.jpg


20150815_142145_zpsrqjhqsio.jpg


20150815_142131_zpshhoidg7a.jpg


Click to read more...
 
Cutting it up and mocking the shell, double MDF all the way around

20150815_142127_zpshppeo5lo.jpg


20150815_190036_zpsj18yxwxy.jpg


test fit, we went for total MAX slide in dimensions so had to be sure we could continue to assemble the shell outside of the vehicle

20150815_192552_zpsjelumx57.jpg


20150815_192634_zpsphixa3ml.jpg


 
tuned in.

Just because I have the same vehicle, minus the "extreme" part...just an LS //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Your busy doing some builds there OP //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Note: Fully musical build here, not a burp box, wide frequency band, 28hz to 55hz

This is 6.5 cubes internal, dialed in to the driver specifics, running on my old (not very old) team mmats 4000.1 wired at 1 ohmWe clamped this amp at 4,300 watts in the lanes

 
---------- Post added at 12:21 AM ---------- Previous post was at 12:21 AM ----------

[/color]

tuned in.
Just because I have the same vehicle, minus the "extreme" part...just an LS //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Your busy doing some builds there OP //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Click to expand...
yea man, i have another big build i need to update too,

being an S10 extended cab owner, your going to like this one

 
now to put it in

20150815_231719_zps5poykdfh.jpg


this hifonics amp was in here just for testing this evening, these photos are a calaboration of 2 days, this is still the first day

20150815_232110_zpsqzyf4wcs.jpg


20150818_204817_zpsyusbt3k9.jpg


 
next day, time to start sealing it off, we were short on wood, so we made a makeshift third baffle/ sealed off panel, but there were still large sections not sealed off, you'll see in the video i post, goal here at this time of night was to do what we could and go see some numbers

(notice its night, we do this till about 4a.m. ship orders and take calls during the day, big builds at night lol )

20150818_210310_zpsncexk8bu.jpg


20150818_210802_zpssjqyvbxq.jpg


 
Heres where we add an older Northstar SMSAGM400 which fits perfect between the port and sub, and easily run 4k RMS on bone stock electrical

20150818_210901_zpslol9husg.jpg


Seats recline back perfectly

20150818_212559_zpsqa9cy8px.jpg


 
wiring it up, you can see the gap where we did not have enough remaining MDF

we will be making a new panel that is fully sealed off, we just couldn't purchase another sheet this time of night and it was all about hearing some bass this night

20150818_210923_zpsswlnicxn.jpg


20150818_212610_zpslcll9mx9.jpg


heres the HUGE non sealed off gap, again nowhere to get more MDF at this time, this is the perfect recipe for cancellation, but we will see where its at now, so we have a good ballpark when its 100% sealed off

20150818_220241_zps2jab0rue.jpg


 
Not sealed off, here is the "just the beginning" results, there is cancellation due to not being sealed off, but for a musical non burp box, we are at a decent start

i'll link the video in the next post, this is my SPL LAB USB meter, which is registering 1 DB lower than the Termlab magnum

20150818_220012_zps5peoar5x.jpg


 
I also want to note, this truck isn't wired sufficiently. this truck has a ways to go. but as he can make it to Springfield we will get it finished

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Previous topic Next topic

Similar threads

jeffs42885
Pre-Fab Box for single Sundown 8"
Sounds like you need new coils. My Explorer with three 15's, appropriate birch box, fully sound-deadened interior, and a boat behind it does not...
2
1K
Subwoofers
metalheadjoe
metalheadjoe
Mr FaceCaser
Single din radio problem
I would reset the HU and go from there myself
2
493
General Car Audio
audiobaun
audiobaun
A
Running a 4ohm single voice coil sub at 2ohm?
2x 4 ohm coils can be wired parallel to 2 ohms or series to 8 ohms. There's many amps with 2 ohm power you can use.
3
329
Subwoofers
Buck
Buck
A
Running a 4ohm single voice coil sub at 2ohm?
Answered in the other Thread for you.
1
258
Subwoofers
audiobaun
audiobaun
I
Best budget single DIN head unit
Avoid jvc 480bhs hard to see the display in the daytime even with the brightness all the way up also not as easy getting to the audio menu like...
5
588
Head Units
2RZ-FE
2

About this thread

GPcarAudio.com

GPcarAudio.com

Pro Seller
Supporting Vendor
Thread starter
GPcarAudio.com
Joined
Location
Missouri
Start date
Participants
Who Replied
Replies
32
Views
4,736
Last reply date
Last reply from
adulbrich
Share thread
IMG_7545.png

Chris Gerrish

    Apr 25, 2024
  • 0
  • 0
IMG_7544.png

Chris Gerrish

    Apr 25, 2024
  • 0
  • 0

Latest topics

Top
Menu
Home
Refresh