Sidebar

1/2" MDF

Reply
Jump to latest
if it's like under 300w, I guess so. If you turly want to maximise though, I strongly recommend that you try fiberglass.. they will be much thinner and stronger than 1/2" MDF.

 
Im about to build two underseat boxes for some Sony 10s to fit underneath the back seat of a 98-99 chevy silverado ext cab. Could I use 1/2" mdf to get as much air volume as possible or would it not be practical?Thanks
Click to expand...

If you just running some sony's and want max airspace why not just use some good old cardboard and duck tape.

J/K, The 1/2" MDF would work fine especially since you got sony's

 
To tell you the truth though i have actually seen that done. All i could do was laugh my ass off until the guy was like what's wrong i thought it sounded really good. :hilarious

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Previous topic Next topic

Similar threads

?
Bracing MDF
Damn, those Brickhouse subs are beefy! 4" coil and big power? Yes please!
10
901
Enclosure Design & Construction
some dude
some dude
H
Mounting MDF rings to sheet metal, (with minimal access to behind).
just use riv-nuts or clip-nuts, made for blind fastening. some window weld should hold the ring on there pretty good..... being 4x6, you could...
4
1K
Enclosure Design & Construction
akheathen
akheathen
D
19mm MDF or 12mm marine plywood for sub box?
I say go for it. Just add some kind of bracing to the bigger panels. Some old home speaker boxes were made of 3/8" mdf. Maybe not even mdf, some...
1
913
Subwoofers
1aespinoza
1
GoT_2B_BuMpN
Filling screw holes in MDF subwoofer enclosure
Yea. That's what I did. I mixed the glue with the dust from sanding and fill in the bigger holes. Then filled the rest with wood filler..works awesome
9
3K
Enclosure Design & Construction
GoT_2B_BuMpN
GoT_2B_BuMpN
B
Is 1/2 mdf good enough for Sundown U?
Yes Should be easy with a flush trim bit in a router and will allow OP to hide any screws/nails used along edges.
4
1K
Enclosure Design & Construction
hispls
hispls

About this thread

B

Bodawg111

10+ year member
Member
Thread starter
Bodawg111
Joined
Location
Longview, Tx
Start date
Participants
Who Replied
Replies
7
Views
722
Last reply date
Last reply from
JnEsPappa
Share thread
Subwoofer remote.jpg

MrG

    Apr 18, 2024
  • 0
  • 0
20240416_012638.jpg

MrG

    Apr 18, 2024
  • 0
  • 0

Latest topics

Top
Menu
Home
Refresh