stutla22
Junior Member
Hello everyone, I recently purchased a threatcon 4 12'. These specs are from c2audio's Site
12" Threatcon-4 Dual-2 Ohm
FS: 35.7 Hz
VAS: 28.8682 L
QES: .4082
QMS: 2.2965
QTS: .3466
MMS: 239.1952 g
BL: 22.9272
SENS: 87.0965 DB
Enclosure Recommendations:
Sealed: 1.0 - 1.25 ft^3
Ported: 1.5 - 2.0 ft^3 @ 35hz
This will be my first box build but my brother is helping me cut the wood perfect. Should I use 1 1/4" staples and glue or wood screws and glue? I was just going to copy this box build
12 inch Custom Ported MDF Car Stereo Sub Woofer Enclosure 2 CU ft Tuned 32Hz | eBay
But its for 32hz I want 35. Unsure how long to make port and how open to make it to get 35hz?
I'll be running it on a audiopipe 1800 at 1 Ohm.
Any help will be appreciated!
12" Threatcon-4 Dual-2 Ohm
FS: 35.7 Hz
VAS: 28.8682 L
QES: .4082
QMS: 2.2965
QTS: .3466
MMS: 239.1952 g
BL: 22.9272
SENS: 87.0965 DB
Enclosure Recommendations:
Sealed: 1.0 - 1.25 ft^3
Ported: 1.5 - 2.0 ft^3 @ 35hz
This will be my first box build but my brother is helping me cut the wood perfect. Should I use 1 1/4" staples and glue or wood screws and glue? I was just going to copy this box build
12 inch Custom Ported MDF Car Stereo Sub Woofer Enclosure 2 CU ft Tuned 32Hz | eBay
But its for 32hz I want 35. Unsure how long to make port and how open to make it to get 35hz?
I'll be running it on a audiopipe 1800 at 1 Ohm.
Any help will be appreciated!
Last edited by a moderator: