Jberger93 10+ year member
Member
Can someone please give me a link to the correct butt connectors I should be using to install headunit ? On RadioShack website please?!? And do I need that crimp tool or can I use pliers
-
5Participant count
-
Participant list
- Thread Starter
- #2
thevic24 5,000+ posts
my silence is deadly...
http://www.google.com/aclk?sa=l&ai=Cwq99JFD4UqWYN-y5yQHxx4HgDuG0nYUEiaTN5kqR0Mb4nAEIBhACILZUKARQoeP87_7_____AWDJ_raH3KPwEKABvcvC_wPIAQeqBCFP0DCpvcNxD7mwF-IGSBUMqld7cKdWs_A_59gJ1CE3mW6ABZBOwAUFoAYmgAertD2QBwHgEq-85eWPutvA0wE&sig=AOD64_2B4YhZ_ou6ZZrzCJVcK0XYnuIn4w&ctype=5&rct=j&q=16ga+butt+connectors&ved=0CIcBEPQO&adurl=http://www.parts-express.com/insulated-butt-splice-crimp-terminal-connector-blue-(16-14)-100-pcs--095-552%3Futm_source%3Dgoogle%26utm_medium%3Dcpc%26utm_campaign%3Dpla&cad=rja
These are at parts express but any local auto parts store will have them. And yes, you should use the crimping tool.
you can also just use orange wire nuts (not recommended). If you do, make sure to use the ones that have the metal inserts.
mylows10 5,000+ posts
B2,singer,ampere rep
They will work just fine. And yes on the crimping pliers
bigaudiofanatic 10+ year member
Dynamic Mobile Audio
Or you can solder and heat shrink which will give you a more solid connection.
Activity
No one is currently typing a reply...
Similar threads
Still not convinced?
https://gpcaraudio.com/15-dual-high-output-glue-it-screw-it-sub-enclosure/
You can order the box glue and screw kit with...
- Started by sycc
- Enclosure Design & Construction 2
I had two of the Xtreme 12's and they were dual 4ohm. They read at like 3.5ohm per voice coil which is common.
- Started by ThatGuy420
- Subwoofers
Ive never seen this amplifier before. Can you take a pick of the back? Interesting amplifier.
- Started by Eray
- Amplifiers
Hello!I'm in France and I can't register on Hifiengine for unknown reasons and i need to download the service manuals for Blaupunkt Baden Baden...
- Started by Vartac
- General Car Audio
Of course not bro, I'm having my car transported to you for install.. You are the only person I would let touch my car on the planet.. Should be...
- Started by MarkTro
- Enclosure Design & Construction 2
About this thread
Latest topics
-
Help With Kenwood DDX9907XR / DMX907S - Kenwood Technical Support Can't Help
- Started by fadetoblack73
- Replies: 5
-
-
-
-
Amp Shorting out Infotainment Screen?- Started by Chris Morton
- Replies: 6