Havoc 12s Box

  • 5
    Participant count
  • Participant list

g2shuck

Junior Member
Ok guys The sdc2.5 I have now is loud but not enough. I designed a box today in sketchup that would be forward firing and sealed off with two havoc 12s on a soundqubed 2200d. Box is 6.12 Gross 5.16 Net tuned to 34.92hz with 2 6 inch aeros that are 18 inches long each. This gives me 10.95 per foot of port. WIll this work well?









 
I would center the ports. That really bothers me for some reason, it'll probably work fine though.

 

---------- Post added at 07:38 PM ---------- Previous post was at 07:38 PM ----------

 

How close are the ports to the back wall?

 
good catch on the port and back wall. I can change it to double 5 inch aeros that are 14 inches long and it will put the port 6 inches off the wall and tune it to 31.81hz

 

---------- Post added at 08:18 PM ---------- Previous post was at 08:17 PM ----------

 

would then have 7.20 port per foot

 
good catch on the port and back wall. I can change it to double 5 inch aeros that are 14 inches long and it will put the port 6 inches off the wall and tune it to 31.81hz 

---------- Post added at 08:18 PM ---------- Previous post was at 08:17 PM ----------

 

would then have 7.20 port per foot
that's pretty low on port area, ive always gone slot though dont have much experience with aero

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

You stated you have an SIA 3500 right now. I would run it for now with the supply for the demand, until you decide you want more power and have...
3
243
Yeah if you want to be loud and don't mind losing the back seat start looking into building a wall. B pillar wall. Gives you lots of room for...
6
840
I don't know, maybe two 12's and two 15s on a IB wall maybe? Lol!
2
743

About this thread

g2shuck

Junior Member
Thread starter
g2shuck
Joined
Location
United States
Start date
Participants
Who Replied
Replies
8
Views
992
Last reply date
Last reply from
g2shuck
1000005348.jpg

Deepak Walia

    Apr 23, 2024
  • 0
  • 0
1713846388212.png

Random4thGuy

    Apr 23, 2024
  • 0
  • 0

Latest topics

Top