Hifonics Brutus stable below one ohm?

  • 4
    Participant count
  • Participant list
brutus is bad enough on voltage at 1 ohm so if you drop it below 1 ohm you better have a very good electrical to back it up or it will fry

 
brutus is bad enough on voltage at 1 ohm so if you drop it below 1 ohm you better have a very good electrical to back it up or it will fry
So if I keep it above 13 volts will it be good? I have the big 3, duralast platinum, but cant afford a ho alt or a high end amp like a sundown 1500

 
So if I keep it above 13 volts will it be good? I have the big 3, duralast platinum, but cant afford a ho alt or a high end amp like a sundown 1500
Yep, but they do rated at 14. Example my aq 2200 was easier on my electrical than the brz 1700 I had

 

---------- Post added at 12:13 PM ---------- Previous post was at 12:13 PM ----------

 

So if I keep it above 13 volts will it be good? I have the big 3, duralast platinum, but cant afford a ho alt or a high end amp like a sundown 1500
Yep, but they do rated at 14. Example my aq 2200 was easier on my electrical than the brz 1700 I had

 

---------- Post added at 12:13 PM ---------- Previous post was at 12:13 PM ----------

 

So if I keep it above 13 volts will it be good? I have the big 3, duralast platinum, but cant afford a ho alt or a high end amp like a sundown 1500
Yep, but they do rated at 14. Example my aq 2200 was easier on my electrical than the brz 1700 I had

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yep, at the amplifiers. I get the same 14.7 volt reading when they cutoff too.
12
1K
Pull it and test it at the battery post. Simple Power up test to verify if it powers up fine out of protect mode. if it does then Id be checking...
3
1K
I have a Gemeni VII, Heucules VII, Pluto VII, and a Vulcan VII left out of a massive slew of VII and VIII series. They still work Excellent...
5
3K
  • Locked
COMPLETED Hifonics Plato III
Yes, they are painted. The cover is very easy to take off and repaint to whatever color of choice to match the install.
2
1K
I recommend wiring to the 2 ohm load on the amp you stated you have, or you can wire to an 8 ohm load for amp stability. You can wire one sub to...
11
2K

About this thread

Braindead

Senior VIP Member
Thread starter
Braindead
Joined
Location
York, SC
Start date
Participants
Who Replied
Replies
5
Views
1,296
Last reply date
Last reply from
05fronty
1000005348.jpg

Deepak Walia

    Apr 23, 2024
  • 0
  • 0
1713846388212.png

Random4thGuy

    Apr 23, 2024
  • 0
  • 0

Latest topics

Top