2 13w7s needin advice

you other option is to wire to .375ohm I believe and your amp will not handle that
why would you say it then? lol

anyways yeah your amp cant do that run with the link he gave you at first...but ultimately get a bigger amp or another one...

or just run one of the subs

 
With the subs wired to 1.5 ohms like is described in the link, your subs will sound just fine. Don't buy into the whole "underpowering" nonsense. Your amp will push somewhere in the neighborhood of 1500 watts to those two subs which is more than enough to get them to get very loud. This is assuming that it is the bdcp amp. If it were an older one, it would do slightly less(1200-1400) at that 1.5 ohm load, and you probably would not be able to hear the difference.

 
Just traded my 1500 birthsheet said it did 1763 at m @14.4v and 1900ish at 1 ohm. So i would say yes it is right there at the sweet spot at the 1.5 ohm load.

 
With the subs wired to 1.5 ohms like is described in the link, your subs will sound just fine. Don't buy into the whole "underpowering" nonsense. Your amp will push somewhere in the neighborhood of 1500 watts to those two subs which is more than enough to get them to get very loud. This is assuming that it is the bdcp amp. If it were an older one, it would do slightly less(1200-1400) at that 1.5 ohm load, and you probably would not be able to hear the difference.
+1

 
With the subs wired to 1.5 ohms like is described in the link, your subs will sound just fine. Don't buy into the whole "underpowering" nonsense. Your amp will push somewhere in the neighborhood of 1500 watts to those two subs which is more than enough to get them to get very loud. This is assuming that it is the bdcp amp. If it were an older one, it would do slightly less(1200-1400) at that 1.5 ohm load, and you probably would not be able to hear the difference.
+1

 
I looked up the specs on the new rockford power1500 and...

Rated Power

(RMS Continuous Power):

1000 Watts x 1 @ 4-Ohm

1500 Watts x 1 @ 2-Ohm

1500 Watts x 1 @ 1-Ohm

so wired to 1.5, you should get the 1500 max rating and I agree with the other guy, it will be loud.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

i have a 15 already for the lows ita a little over kill for a crew cab but I like it and I was hoping it would sound better and louder than my old...
7
233
I always leave approx 6" or so for that very reason, in case I decide to swapp an amp if needed,or wanting too.RCAs ect. I deff do the extra 6-8"...
9
388
Honestly, beyond what you need. It will do the trick for sure, but it is excessive. Not a bad thing, just more than you will ever need. No need...
1
260
i would not worry about the tweeters. They will never see anything above 20 watts before your ears bleed. your options with 4 channels would be...
4
341
thanks 1aespinoza for advice I decided to not use the blaupunk I got a real nice Pioneer.
2
248

About this thread

mulletman.zane

Junior Member
Thread starter
mulletman.zane
Joined
Location
Centralia, IL
Start date
Participants
Who Replied
Replies
8
Views
795
Last reply date
Last reply from
maddog
Subwoofer remote.jpg

MrG

    Apr 18, 2024
  • 0
  • 0
20240416_012638.jpg

MrG

    Apr 18, 2024
  • 0
  • 0

Latest topics

Top