Jump to content


Sign in to follow this  
Kevscurry

Help me with my pioneer deck

Recommended Posts

Hi I need some help with my pioneer premier deck. I bought a new truck and it already came installed. I need to find the aux input so I can play my own music. How do I get to the back of the unit and plug in my cord if its already installed?

Share this post


Link to post
Share on other sites

Pioneer decks use a security key(2) that slides in on the sides of the radio itself and release the locks in the basket that the radio slides into. With these keys u would pop the beauty ring off the radio exposing the basket and key slots. After the keys are inserted u would slide the radio out careful not to disturb any previous connections. Running ur cable inside ur dash is well, self explanitory. Remember NOT all pioneer decks have aux ports.


97 Ram

2 sets Kicker ks650.2 on a

Mmats 2050x

 

2 American Bass XFL12s(4th order) on

American Bass VFL110.1

Kinetic hc1800

 

Traded to: WinkyChevelle, Sold to: Outer,Markbuhler007,67bass71, Bought from: Mylows10

Share this post


Link to post
Share on other sites

Create a free account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's free & easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  


  • Recently Browsing   0 members

    No registered users viewing this page.


  • Similar Content

    • By AspastIIcBean
      My list of gear as follows
      1x Boss mono block amp 2500w (old setup)
                  -twin pioneer champs Dvc 1200w 12"
      1x pioneer 4ch amp 1000w (60rms x4ch)
                   - 2x pioneer 6.5 260w (60w                                                 rms)component
                   - 2x pioneer 260w 6" (60w rms) coaxial
      Head deck : pioneer fxh755 bt (2 RCA out)
      Just wanted to know the best way to get the audio to the amps,
      1 RCA per amp?
      I've never delt with  4ch is just having 1 RCA going to give me full control or full quality on my 4ch. If I got 2 RCA splitters would that achieve anything useful?   
      Is high level worth using do I lose any quality compared to RCA? So out RCA into mono amp amd high level into 4ch amp?
      What's the best way about doing this. Is there any recommendations? I'm not wanting to spend too much money on this 🤣
    • By A321J
      Good evening,
       
      I'd like to upgrade my stereo in a 2011 Toyota Land cruiser Prado 150.
      I have a factory audio system with the amplifier under the passenger seat.
      The only requirements are 2xUSB, Apple carplay and the ability to connect a reversing camera.
       
      The Pioneer SPH-Da120 looks as though it would be suitable.
       
      Could anyone tell me if this will connect easily to the factory speakers on my Prado. I would like all the speakers to work and be connected correctly, but I'm not at all familiar with these things.
       
      So if anyone has done this on their Prado or has any advice it would be greatly appreciated.
      Thanks
    • By karumudi7
      Hello, I recently bought a Pioneer AVH-W4400NEX from BestBuy and using it from a month in my 2014 Ford Mustang.
      The radio was decent, but I am having problems with:
      1. Android Auto - When I connected by phone (BB Keyone), I always get a message: "To use Android Auto please stop the car and check your phone". I reset my phone completely and tried but no use. Do any one know what will be the problem for this? I am using OEM USB cable.
      2. I have disconnected the Head Unit GPS cable to have the video play in motion. But, when I connect my iPhone for Navigation, it looks the CarPlay is taking the GPS signal from HeadUnit rather from the iPhone. Is it true that Android Auto and CarPlay uses HeadUnit GPS for navigation? If so, is they anyway to change it?
      3. I see a weird message on the HU screen: "No paired phones connected" after couple minutes of start up, even though there is a phone connected via Bluetooth and music is already playing. 
      4. I noticed, randomly, when I tried to increase the volume from my steering wheel control some times it is moving to next music track. But this is random.
      5. The BestBuy technician who fixed this radio in my car told, the radio may give blue screen errors if tried to connect with AUX cable. Due to this, he didn't provisioned the AUX port. Is this true?
      Any help with above is appreciated.
      Thanks!
       
    • By saucemessiah
      So I recently purchased 4 Polk Audio DB652's for my 2012 Subaru Impreza (with a stock in-dash stereo). I like them but I wanted more out of them so I purchased a Pioneer D9605 5 channel amp. I chose this amp because I wanted to see more output from my current 4 door speakers and a sub woofer that I am planning on getting (Rockford Fosgate P3D4 12"). I feel like I got my amp without being well informed on other factors and was wondering what some great car enthusiast think of my purchases and car audio goals. Ask any questions that I would need to further clarify to help y'all help me!  Also, are the Polk door speakers I got that great?
      All help and recommendations are very much appreciated!!!
      P.s. I don't have a large knowledge of car audio if it isn't yet obvious.
       
×