damiandevika 10+ year member
Junior Member
I know that there are many amps in this range out there. I'm looking for the one that will only use about 15 amps and power a sub. I don't have a lot of battery power available.
Great amps for the 150 to 200 wrms range
- Thread starter damiandevika
- Start date
- Replies 22
- Views 2K
-
12Participant count
-
Participant list
mylows10 5,000+ posts
B2,singer,ampere rep
vfl 1880 will give you alot more than 200 rms tho.and they are 40 amp fused i believe ,but if you run it at 2 ohms power for 500 watts rms it will use only 20 amps
- Thread Starter
- #3
How small of a gauge wire can I use. This is for a really compact project
mylows10 5,000+ posts
B2,singer,ampere rep
its a 4 gauge amp ,and very tiny 6 x5 x 2, you can use a 8 gauge if needed.i have both in stock
The vfl amps are great little amps, there very compact
- Thread Starter
- #6
U think 8 or 10 gauge will be too thin?
mylows10 5,000+ posts
B2,singer,ampere rep
8 will be fine ,but if run at 2 ohms not 1 ohm
- Thread Starter
- #9
Most likely would be 4ohms
mylows10 5,000+ posts
B2,singer,ampere rep
then you'd get around 300 rms
trumpet 5,000+ posts
Barry Schanz
The smallest mono amp I have is the Massive Audio BX2. 6.3" x 5" x 1.6" 480W x 1 at 4 ohms. It takes no larger than 8 ga power and ground wire. Off battery power it will make less power, of course, but it's very efficient.
mylows10 5,000+ posts
B2,singer,ampere rep
keep_hope_alive Premium Member
Acoustics Engineer
There are several new compact amplifiers on the market that eliminated the old power supply design and have much higher efficiency.
RF has their PBR 300x1 or 300x4 versions that are a few years old now.
http://www.rockfordfosgate.com/products/product_details.aspx?itemid=120465
RF has their PBR 300x1 or 300x4 versions that are a few years old now.
http://www.rockfordfosgate.com/products/product_details.aspx?itemid=120465
- Thread Starter
- #14
Thanks for all the options. Anyone ever had any experience with the jl audio xd series amp?
Activity
No one is currently typing a reply...
Similar threads
Yeah, these are listed as 3ohms nominal and that is why you see the 2.7ohm rating (where they can drop to). There are a number of things wrong...
- Started by Pat123
- General Car Audio
i would recommend placing an amplifier on these to serve any justice at all
https://www.polkaudio.com/en/product/mm1-series/mm6502...
- Started by deanster
- General Car Audio
- Locked
COMPLETED
Audio Control LC7i In great condition.
Dibs. PM sent.
- Started by Koltrain129
- Car Audio Classifieds
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
- Started by Shomik Afi
- General Car Audio
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
- Started by strkrfan13
- Car Audio Classifieds
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 22
- Views
- 1,540
- Last reply date
- Last reply from
- Dirtrider4eva
Latest topics
-
-
Help With Kenwood DDX9907XR / DMX907S - Kenwood Technical Support Can't Help
- Started by fadetoblack73
- Replies: 5
-
-
-
