-
2Participant count
-
Participant list
-
k_schutte
can work nicely if you do it right good sir //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif design it properly your good to go!
edit: driver has a decent QTS value so the box shouldnt be TOOO big
specs to help you out
Electrical Q Value (Qes): 0.46
Mechanical Q Value (Qms): 4.4
Total Speaker Q Value (Qts): 0.42
Free Air Resonance (Fs): 26.6 Hz
Equivalent Compliance (Vas): 31 liters
One-Way, Linear Excursion (Xmax): 18 mm
Efficiency (SPL 1W/1m): 83.2 dB SPL
Effective Piston Area (Sd): 310 cm2
DC Resistance (Re): 2.8 ohm
Nominal Impedance (Znom): Dual 4 ohm
Thermal Power Handling (Pe): 600 W
Force Factor (Bl): 17.7
edit: driver has a decent QTS value so the box shouldnt be TOOO big
specs to help you out
Electrical Q Value (Qes): 0.46
Mechanical Q Value (Qms): 4.4
Total Speaker Q Value (Qts): 0.42
Free Air Resonance (Fs): 26.6 Hz
Equivalent Compliance (Vas): 31 liters
One-Way, Linear Excursion (Xmax): 18 mm
Efficiency (SPL 1W/1m): 83.2 dB SPL
Effective Piston Area (Sd): 310 cm2
DC Resistance (Re): 2.8 ohm
Nominal Impedance (Znom): Dual 4 ohm
Thermal Power Handling (Pe): 600 W
Force Factor (Bl): 17.7
OP
k_schutte 10+ year member
CarAudio.com Veteran
- Thread Starter
- #3
I've never designed a bandpass but my buddy has done a ton and has quite a few trophies ans titles under his belt but he always does walls and suv's. I was thinking like .6~ sealed each and like 2-2.5 ported.
Last edited by a moderator:
Activity
No one is currently typing a reply...
Similar threads
is this a ported enclosure or a 4th order? If 4th and tuned to 33hz, unless specifically designed to do that, it wont have any bandwidth. It might...
- Started by Evyn1
- Enclosure Design & Construction
I’m going to stick with the 4th order bandpass for now and see if it can improve it.
The bandpass actually plays 100 rebased songs good.
- Started by Evyn1
- General Car Audio
DSP man, anything is possible with DSP. :giggle:
- Started by Dirte Dave
- Enclosure Design & Construction
I hope you didn’t misInterpret my last message.. I was excited that I actually understand what you’re talking about… Lol! I will level with you. I...
- Started by Bug420247
- Enclosure Design & Construction
If you're serious about an 18 in the trunk front firing/trunkwalled go ahead. At least you got electrical covered /w/ a 600rms sub I'd wager.
If...
- Started by technotic
- Enclosure Design & Construction 2
About this thread
