inferno1985 10+ year member
Senior VIP Member
when u turn up the volume high? and at lower frequencies the subs move but no sound? check your amp make sure its not set to low, if the freq is set to low on your amp your subs will move and push air but no sound. or barely any sound.
Sounds more like playing way below port tuning.
- Thread Starter
- #5
It's in a sealed enclosure with the sub sonic filter set to 20htz and the Lpf is set to 120
Activity
No one is currently typing a reply...
Similar threads
Could be a qc issue from the factory
- Started by Wick3dMrB
- Wiring, Electrical & Installation
This type of controller will work on any amplifier (or specific channel) as it is inline with the RCA connections and functions entirely as volume...
- Started by walkerm
- Subwoofers
Need input on how to create optimal acoustics in a tight space. I’ve attached pics of the console. I want to upgrade the stock sub to an 8 inch...
- Started by vlusardi
- Enclosure Design & Construction
Defiantly. LOL 😂 It has never happened to me👀:poop:
- Started by Evan Kays
- General Car Audio
Using a Y RCA to split signal from amp to amp to give both amps the signal they need from the HU and subs in different /separate enclosures tuned...
- Started by Aaron Johnson
- General Car Audio
About this thread
Latest topics
-
Jeep center console sub install issues.
- Started by vlusardi
- Replies: 0
-
-
-
-
Help With Kenwood DDX9907XR / DMX907S - Kenwood Technical Support Can't Help
- Started by fadetoblack73
- Replies: 5