Trevor28139 10+ year member
Member
About to tear truck down to get ready for next build, I intend to not to tear it down again so I would like to get the sound deadener right the first time and I want to ensure that I have enough on hand to do the entire truck adequately. Looking at the AT and they have 80-120-240 sq foot. Ballpark estimate is I have no more than 40 sq ft of floor, so double that for the roof and we are at 80, then the doors, which I'm doing pods so I don't have to worry about the actual inside of the doors just the inner skin. so 120 sq ft seems to me like it would be enough IF one layer is sufficient. I'm not very concerned with spending money on it but I don't also don't want to over order and **** away money either.
So is 1 layer of 60 mil adequate? or what would you guys with experience with it recommend?
And if anyone has done a similar sized vehicle, how much did you use to get good results?
Ford Expedition
So is 1 layer of 60 mil adequate? or what would you guys with experience with it recommend?
And if anyone has done a similar sized vehicle, how much did you use to get good results?
Ford Expedition