FS Blown RF T5002 Power series amp

  • 6
    Participant count
  • Participant list

grassroots
10+ year member

needs car audio rehab
1,250
1
ATL
Item(s) for Sale:

RF T5002

Item(s) Description/Condition:

Blown. It has to be something easy to fix... Just a few months after I bought it new it popped the 100A fuse in it. I put in the only other ANL fuse i had (300, big mistake) and it blew up my right door speaker when it turned back on. So it sounds like there's some sort of short circuit on the right speaker channel. Maybe just something conductive fell under or on top of the board?? Unfortunately, it's missing the center piece and it has a crack in the plastic (shown in pic) but it's not real scratched up, just a little dirty.

Price:

$50 shipped

Shipping and Miscellaneous Item Information:

free

Item Pictures:

IMG_1166_zps7e06c2e3.jpg


IMG_1167_zps28d83d6b.jpg


IMG_1168_zps80e553ff.jpg


 
75 watts RMS x 2 at 4 ohms

150 watts RMS x 2 at 2 ohms (250 watts RMS x 2 at 1 ohm)

300 watts RMS x 1 in bridged mode (at 4 ohms)

500 watts RMS x 1 in bridged mode (at 2 ohms)

1-ohm stable (2-ohm stable in bridged mode)

and it's safe to say these power series amps will put out 10% more power than rated.

edit: you know it's ready to throw down with 1/0 +and- connections.

 
75 watts RMS x 2 at 4 ohms150 watts RMS x 2 at 2 ohms (250 watts RMS x 2 at 1 ohm)

300 watts RMS x 1 in bridged mode (at 4 ohms)

500 watts RMS x 1 in bridged mode (at 2 ohms)

1-ohm stable (2-ohm stable in bridged mode)

and it's safe to say these power series amps will put out 10% more power than rated.

edit: you know it's ready to throw down with 1/0 +and- connections.
still got this?

 
75 watts RMS x 2 at 4 ohms150 watts RMS x 2 at 2 ohms (250 watts RMS x 2 at 1 ohm)

300 watts RMS x 1 in bridged mode (at 4 ohms)

500 watts RMS x 1 in bridged mode (at 2 ohms)

1-ohm stable (2-ohm stable in bridged mode)

and it's safe to say these power series amps will put out 10% more power than rated.

edit: you know it's ready to throw down with 1/0 +and- connections.
on average these amps put out 35% more

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

What amp and Ohm load are you running? What are the dimensions of the enclosure? sealed or ported?Tuned too? You may be better off buying a pair...
2
854
  • Locked
I have a zapco 4.0 and 6.0 that was stored in an area near the beach and corroded it pretty bad. Never was powered since it was stored working...
14
4K
Everyone I found the problem it's the RCA cables, I had my electrician mate have a look and he pulled one of the cords halfway out and the subs...
14
1K

About this thread

grassroots

10+ year member
needs car audio rehab
Thread starter
grassroots
Joined
Location
ATL
Start date
Participants
Who Replied
Replies
7
Views
1,104
Last reply date
Last reply from
2Dcore
IMG_1309.jpeg

vlusardi

    Apr 24, 2024
  • 0
  • 0
IMG_1308.jpeg

vlusardi

    Apr 24, 2024
  • 0
  • 0

Latest topics

Top