4kw Build in a Nissan Sentra SE-R Spec V

Well I thought I would start a build log as I have never done one before. My old setup was 1 15 inch Fi BTL on a aq2200d with stock electrical. It wasn't enough. So I have decided to go with the loudest reasonable set-up I can get in my sentra without going crazy and cutting out my rear trunk brace to make a wall. Here is what's going in it:

2x 12inch AA Mayhem's (D1)

AQ3500D.1 Amplifier (4300W RMS @ 1 Ohm @ 14.4V)

Box 4.2 Cubic Feet tuned to 32Hz

Pioneer AVH-P4400BT Touchscreen Head Unit

Polk Audio DB5251 5.25in Component Speaker System

Pioneer 5500T 2 Channel Amp (125W x2 @ 4 Ohms)

270 Amp DC Power Alternator

XS Power D3400 Battery (Starter)

XS Power D3100 Battery (Trunk)

Over 75ft of 0 Gauge (100% Copper)

Well here is what I have done so far, more to come:



Head Unit Install:









Polk Audio Components Install:











Broke 4 hole saws drilling hole for wires for left pillar and only went through 1 for the right... Figures.