Tone415 10+ year member
A.K.A FrisnoG
Im going to give as much background info as possible.
Car is a 96 Acura RL3.5
I have the stock stereo. Using the stock front stage for now. I have a LOC comming from what was the rear 6x9 wires to a mono amp @ 2 ohms. one sub.
I wanted to add 3 way 6x9's to the rear to help with the mids/highs. the stock 6x9's only played bass. so i connected the 3-way 6x9's to a 2 ch amp. One speaker per channel @ 4 ohms each channel.
PROBLEM
6x9's ONLY play bass. No matter what settings i use on the amp, the amp will not play any kind of highs. ONLY bass. So i put the same amp and 6x9s to a friends car.. works fine. WHAT IS THE PROBLEM!?
Car is a 96 Acura RL3.5
I have the stock stereo. Using the stock front stage for now. I have a LOC comming from what was the rear 6x9 wires to a mono amp @ 2 ohms. one sub.
I wanted to add 3 way 6x9's to the rear to help with the mids/highs. the stock 6x9's only played bass. so i connected the 3-way 6x9's to a 2 ch amp. One speaker per channel @ 4 ohms each channel.
PROBLEM
6x9's ONLY play bass. No matter what settings i use on the amp, the amp will not play any kind of highs. ONLY bass. So i put the same amp and 6x9s to a friends car.. works fine. WHAT IS THE PROBLEM!?