system bought off here

aimology
10+ year member

Member
So, I bought a Nice amp and 2 Subs from two respectable people. Ive been in text mode with them. I've even involved Jacob from Sundown, whom I tracked down from facebook. Awesome guy by the way. Im just looking for advice

2 10" D2 OZ Matrix Elite

Saz Sundown 1000D

Pioneer 6300BT ( ebayed )

All new wiring & RCAs ( accept on sub terminals ) Knu Koncepts with 150w Fuse @ battery

Top of the line Digital DMM VC say 2.0 each

Radio is set at custom level - all EQ bass is out -4 | mid vocals / highs are adjusted as needed

Gain and Bass boost have been turned off and full blast

This is full blast because it makes me LOL @ loud - Also, does this prier @ 2Ohm load when I was trying to tune. I put this at .5 for testing because the Flop is not as loud and I thought maybe it just wasnt beating like it was suppose to






Explain please - Any help greatly appreciated.

 
//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I didnt think the ohm load would still be held if they were blown
 
//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I didnt think the ohm load would still be held if they were blown
not true.. there is more then 1 way to blow a sub. and i got a kicker cvr15 sitting here that will ohm out fine on both coils but its blown to fvck lol..

 
dont let the subs sit flat on the wood like that...ur covering up the pole vent try hooking them up individually and hold it up and run some bass threw them....also check ur wiring i think something is up

 
check for tears on the surrounds one of my subs had the surround lift up from the cone causing a "like blown" sound. If everything checks out they are blown like your ***** on your birthday.

 
Original install was a normal plug and play

gains all flat = 0

After messing with wires etc etc - I was like, why is the bass not loud @ volume 15 when my highs are.

I adjust my radio to custom and made it so 30 volume on radio was perfect out of 40 max - no EQ bass added obviously

Amp was all set to 0

I hooked up subs for 2 ohm load and 15 sounded same as 30 on subs.

talked to jacob who said put it @ .5 ohm just to see how much power the amp dishes out, should actually move them ( we were not taking into account blown subs )

so I did and the result is in video

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Sweet!! Im happy to hear that it was not a major issue.!! Very nice man. Thanks for letting us know what the culprit was!!
19
414
Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
536
I'm most likely getting a 2022 Infinity QX60 next week. Like most new cars, it has the "Infotainment" system with the huge screen and all the...
0
246
that is an Ideal crossover and designed for use in an home type loudspeaker. A simple Linkwitz-riley 2-way is easy enough/ The tweeter wire lead...
36
1K
There are bluetooth amplifiers. You can just use your phone or an I Pod as the music source and not touch the radio.
1
370

About this thread

aimology

10+ year member
Member
Thread starter
aimology
Joined
Location
Dayton,OH
Start date
Participants
Who Replied
Replies
68
Views
3,592
Last reply date
Last reply from
oldschool4me
IMG_0632.jpg

just call me KeV

    Apr 19, 2024
  • 0
  • 0
IMG_0629.jpg

just call me KeV

    Apr 19, 2024
  • 0
  • 0

Latest topics

Top