Mr.SoloDolo 10+ year member
Senior VIP Member
Port dimensions..
height: 13.5
width: 3
tuning = ???? aiming for 35 but i think it's wrong
What's wrong with this PORT!?
- Thread starter Mr.SoloDolo
- Start date
- Replies 7
- Views 481
-
5Participant count
-
Participant list
-
Mr.SoloDolo
Port dimensions..
height: 13.5
width: 3
tuning = ???? aiming for 35 but i think it's wrong
OP
Mr.SoloDolo 10+ year member
Senior VIP Member
- Thread Starter
- #2
supposed to be 35hz but on torres box calculator I can't get that tuning without 30inchs of port...
enclosure is around 3.15 cubes net
enclosure is around 3.15 cubes net
CHEMMINS 10+ year member
CarAudio.com Veteran
Ummmm......a pic might help or dimensions.
kramer_212 10+ year member
CarAudio.com Veteran
your photo/link is a no go. can't se it.
OP
Mr.SoloDolo 10+ year member
Senior VIP Member
- Thread Starter
- #5
Fixed... Mybad
marcin93 10+ year member
Senior VIP Member
It is lookin closer to 33 hz but more info on the box would be helpful
RAM_Designs 5,000+ posts
SketchUp Master
26" wide x 15" tall x 20" deep
3.54ft^3 before displacements
-.77ft^3 for port
-.12ft^3 for a 12" sub
----------------------------
2.65ft^3 net volume
Looks like you're tuned between 35-36hz with that port.
3.54ft^3 before displacements
-.77ft^3 for port
-.12ft^3 for a 12" sub
----------------------------
2.65ft^3 net volume
Looks like you're tuned between 35-36hz with that port.
OP
Mr.SoloDolo 10+ year member
Senior VIP Member
- Thread Starter
- #8
This is all I have to work with..
Max Box dimensions:
Depth = 20 in
Height = 15 in
width = 26
Port needs to be tuned to around 35hz
Activity
No one is currently typing a reply...
Similar threads
When I was delivering pizza the companies had to raise employees wages and in response they hired twice as many employees and cut everyone's...
- Started by spokey9
- The Thunderdome!
Working with undersized material, adjusting on the fly, testing before setting; you sound like and old pro. You are as meticulous as alot of the...
Yeah, I plan to run them in my workshop. I haven't gone through them or anything but they startup and run just fine. I don't see any strange spike...
- Started by Rodek
- Amplifiers
Your amp 12v+ is usually a thick wire, same thickness as your ground wire.
The remote input is a thin wire that is usually connected to a wire...
- Started by Brian blanton
- Wiring, Electrical & Installation
Antenna unplugged, noise reduced markedly but not gone. Plugged in again and ignition switched off, noise gone completely so antenna not the only...
- Started by harrytherid
- Wiring, Electrical & Installation
About this thread
