Southwest Region Arizona State welcomes IASCA, Thanks Mike Jaffe :)

AZ,CA,NM,NV,UT
  • 5
    Participant count
  • Participant list
Competitors may use test tones and/or sine sweeps for competition in Stock

Division.

Got it..

The maximum size power and ground wiring allowed in Stock Division is 1/0

gauge wire. One (1) ―run‖ of power wire and one (1) run of ground wire per

amplifier is allowed from the battery/ies to the additional battery/amplifier/

distribution block.....

I have the DD M4a it has two runs for +/-????

 
Competitors may use test tones and/or sine sweeps for competition in StockDivision.

Got it..

The maximum size power and ground wiring allowed in Stock Division is 1/0

gauge wire. One (1) ―run‖ of power wire and one (1) run of ground wire per

amplifier is allowed from the battery/ies to the additional battery/amplifier/

distribution block.....

I have the DD M4a it has two runs for +/-????
If you have 2 runs of positive going from the battery to the amp, that is a no go. But, you can do one run or 1/0 positive from the battery to a distroblock, then run two 1/0 to the amp. Same with the ground. Sorry, I had to read the book too. I printed it out for tmw. Can you get a 1/0 disztro block? Maybe make a "Y" with ring terms, might work.

 
Last edited by a moderator:
Competitors may use test tones and/or sine sweeps for competition in StockDivision.

Got it..

The maximum size power and ground wiring allowed in Stock Division is 1/0

gauge wire. One (1) ―run‖ of power wire and one (1) run of ground wire per

amplifier is allowed from the battery/ies to the additional battery/amplifier/

distribution block.....

I have the DD M4a it has two runs for +/-????
I am not sure if we met Friday. I never where my hearing aids at shows. so I never catch names right away.

This show was one long *** night. it went from 430pm to 1230am. Definately could have been shorter and faster but it was nice.

I ran across some haters of course. for some reason people always have to play the made in america card. which doesnt mean much these days.

I ran the IDBL and had fuses in. but I forgot to drop the impedance to .75 ohms.

I ended up with a 144. but I still placed first.advanced 2

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

subzero

5,000+ posts
CarAudio.com Veteran
Thread starter
subzero
Joined
Location
Chandler, AZ
Start date
Participants
Who Replied
Replies
12
Views
2,431
Last reply date
Last reply from
subzero
image11.jpeg

ttt123

    Apr 16, 2024
  • 0
  • 0
image10.jpeg

ttt123

    Apr 16, 2024
  • 0
  • 0

Latest topics

Top