Southwest Region Arizona State welcomes IASCA, Thanks Mike Jaffe :)

AZ,CA,NM,NV,UT
  • 5
    Participant count
  • Participants list
Competitors may use test tones and/or sine sweeps for competition in Stock

Division.

Got it..

The maximum size power and ground wiring allowed in Stock Division is 1/0

gauge wire. One (1) ―run‖ of power wire and one (1) run of ground wire per

amplifier is allowed from the battery/ies to the additional battery/amplifier/

distribution block.....

I have the DD M4a it has two runs for +/-????

 
Competitors may use test tones and/or sine sweeps for competition in StockDivision.

Got it..

The maximum size power and ground wiring allowed in Stock Division is 1/0

gauge wire. One (1) ―run‖ of power wire and one (1) run of ground wire per

amplifier is allowed from the battery/ies to the additional battery/amplifier/

distribution block.....

I have the DD M4a it has two runs for +/-????
If you have 2 runs of positive going from the battery to the amp, that is a no go. But, you can do one run or 1/0 positive from the battery to a distroblock, then run two 1/0 to the amp. Same with the ground. Sorry, I had to read the book too. I printed it out for tmw. Can you get a 1/0 disztro block? Maybe make a "Y" with ring terms, might work.

 
Last edited by a moderator:
Competitors may use test tones and/or sine sweeps for competition in StockDivision.

Got it..

The maximum size power and ground wiring allowed in Stock Division is 1/0

gauge wire. One (1) ―run‖ of power wire and one (1) run of ground wire per

amplifier is allowed from the battery/ies to the additional battery/amplifier/

distribution block.....

I have the DD M4a it has two runs for +/-????
I am not sure if we met Friday. I never where my hearing aids at shows. so I never catch names right away.

This show was one long *** night. it went from 430pm to 1230am. Definately could have been shorter and faster but it was nice.

I ran across some haters of course. for some reason people always have to play the made in america card. which doesnt mean much these days.

I ran the IDBL and had fuses in. but I forgot to drop the impedance to .75 ohms.

I ended up with a 144. but I still placed first.advanced 2

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

subzero

5,000+ posts
CarAudio.com Veteran
Thread starter
subzero
Joined
Location
Chandler, AZ
Start date
Participants
Who Replied
Replies
12
Views
2,389
Last reply date
Last reply from
subzero
Screenshot 2024-03-07 184329.png

Doxquzme

    Mar 27, 2024
  • 0
  • 0
IMG_3075.jpeg

Daniel Lee

    Mar 27, 2024
  • 0
  • 0

Latest topics

Top