-
3Participant count
-
Participant list
-
Inferno333 10+ year member
CarAudio.com Elite
What is the bolt pattern and gap specs?
nu2spl 10+ year member
CarAudio.com Elite
what size coil?
- Thread Starter
- #4
it is a six bolt pattern and a three inch coil and i will have to do some checking on the gap.
---------- Post added at 07:16 PM ---------- Previous post was at 07:16 PM ----------
Type Component
Size 12"
Impedance 4Ohms
Voice Coil(s) Dual
Voice Coil Diameter 3"
Sensitivity 94dB
Peak Power Handling 1200 Watts
RMS Power Range 400 Watts
Surround Material Rubber
Cone Material Kevlar-impregnated paper
Frequency Response 23 - 450Hz
Installation
Cutout Diameter or Length 11 1/16"
Top Mount Depth 5-7/8"
Sealed Box Volume 1.00cu. ft.
Ported Box Volume 1.75cu. ft.
---------- Post added at 07:16 PM ---------- Previous post was at 07:16 PM ----------
Type Component
Size 12"
Impedance 4Ohms
Voice Coil(s) Dual
Voice Coil Diameter 3"
Sensitivity 94dB
Peak Power Handling 1200 Watts
RMS Power Range 400 Watts
Surround Material Rubber
Cone Material Kevlar-impregnated paper
Frequency Response 23 - 450Hz
Installation
Cutout Diameter or Length 11 1/16"
Top Mount Depth 5-7/8"
Sealed Box Volume 1.00cu. ft.
Ported Box Volume 1.75cu. ft.
Inferno333 10+ year member
CarAudio.com Elite
No way to get the gap specs then?
Activity
No one is currently typing a reply...
Similar threads
I didn't see where there was a difference (didn't see a "light" or "lite" version). That said, if you can fit it, then the JBL BassPro SL 2 would...
- Started by StevenH
- Subwoofers
WANTED
JBL 800GTI
Slava Ukraini, Brother!
Don't have that amp but good luck and welcome!
- Started by Igor Kupinsky
- Car Audio Wanted
Okay I'll try that nd see what happens. Thanks all.
- Started by RGKeller
- Wiring, Electrical & Installation
I don't think this is ideal, but let's assume you can easily mount all the tweeters. That installing them is going to be really simple, and...
- Started by murda Val Boat
- General Car Audio
Working with undersized material, adjusting on the fly, testing before setting; you sound like and old pro. You are as meticulous as alot of the...
About this thread
Latest topics
-
-
-
-
-
where to connect the Pioneers yellow mute wire?
- Started by HandsomeSteve
- Replies: 3