jshak07 10+ year member
148.4 and climbing
Skil Router
Jasper Jig
1/4 collet
THe bit is long enough to cut thru 1.5 inch but heard its not best to cut both baffles at once? Is it cool to set the bit at a little over 1.5" and go at it or should I cut one baffle at a time?
Jasper Jig
1/4 collet
THe bit is long enough to cut thru 1.5 inch but heard its not best to cut both baffles at once? Is it cool to set the bit at a little over 1.5" and go at it or should I cut one baffle at a time?