-
9Participant count
-
Participant list
schackel 10+ year member
CarAudio.com Veteran
i will sell you a battery that will work.
Chrispy 10+ year member
Senior VIP Member
Big 3 would probably do it for you if not already done.
Chrispy 10+ year member
Senior VIP Member
Alt. + to Batt +
Alt/Engine Block to Ground
Batt - to Ground
All those wires will be upgraded/bigger from stock.
Alt/Engine Block to Ground
Batt - to Ground
All those wires will be upgraded/bigger from stock.
Jh8909 10+ year member
CarAudio.com Veteran
yes and if it still dims after that. get a ho alty
dafobbishon3 10+ year member
CarAudio.com Elite
anything above 1k needs at least another small batt.
1hawaii50 10+ year member
Senior VIP Member
I'm running about 1600 watts rms on a factory battery without any dimming issues. However, I'm not running any massive sub setup, and I DO have 1/0 big three upgrade along with additional 1/0 grounding wires.
Indeed, If the big three isnt already done I would do this first.
djarmy2004 10+ year member
djarmy2004
contact basscort2009 on here he sells all kinds of batts that fit your needs
^^thanks man. yes i have plenty of batteries models and sizes. PM me with all you have equipment wise and ill suggest a good battery for cheap //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Activity
No one is currently typing a reply...
Similar threads
What amplifiers do you have? What subs? and running @ what Ohm load?What size is your supply wiring to the amp/amplifiers and fuse size under the...
- Started by Jeepguy123
- General Car Audio
alright man thanks a tonn for the help with this u a lifesaver!
- Started by cmartinez73
- General Car Audio
I have a 2006 Mustang GT and the alternator amperage is 135. I'm running 3 amps totalling 1600 amps, driving 2 subs, 4 - 6x8 and 2 - 6.5. Ive...
- Started by Darinf01
- Wiring, Electrical & Installation
Update: The burning smell is slowly going away at middle volumes. To the point where it only comes on at middle volumes. I adjusted the sub master...
- Started by Rockwelltbird
- Subwoofers 2
Okay everything is working good now. Thanks for the help guys.
- Started by Scooter720
- Wiring, Electrical & Installation 2
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 11
- Views
- 594
- Last reply date
- Last reply from
- basscort2009
Latest topics
-
-
Help With Kenwood DDX9907XR / DMX907S - Kenwood Technical Support Can't Help
- Started by fadetoblack73
- Replies: 5
-
-
-
