Here's some background info:
I'm 16 and from New Mexico so cut me some slack for both of those haha
I have 2 previous builds:1 box for 2 12" Type Rs 1 cube sealed for each sub. I bought an RE MT 15" from mod4000 on usaci so i could try to build a ported box.
i built a box that was 3 cubes tuned to 32.
Both of those boxes looked terrible and so i decided to try 2 things i had never done before: A good looking box and a 10" sub.
So i bought a chrome 10" DC level 4 with Level 5 coils from Noobtastic14
I bought the MDF and had the rest of the tools and went at it. I was told that screws add some strength but that i could build a box without them so i tried that and just clamped each side and waited for 5 hours to do the next one.
I routed out the sub cutout and the aero and the terminal cup.
I mounted the sub and roundovered the entire box.
This was my first work with the roundover so don't judge it too harshly //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
I just primed it and it looks like **** because the primer was sprayed on by my brother //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i will sand it off and restart....I will upload pics of it... then i am painting it with a textured black paint.
The box is 1.9 cubes tuned to 32 (biggest box that will fit into my little ass convertable coupe trunk)
Lemme know what you think
I'm 16 and from New Mexico so cut me some slack for both of those haha
I have 2 previous builds:1 box for 2 12" Type Rs 1 cube sealed for each sub. I bought an RE MT 15" from mod4000 on usaci so i could try to build a ported box.
i built a box that was 3 cubes tuned to 32.
Both of those boxes looked terrible and so i decided to try 2 things i had never done before: A good looking box and a 10" sub.
So i bought a chrome 10" DC level 4 with Level 5 coils from Noobtastic14
I bought the MDF and had the rest of the tools and went at it. I was told that screws add some strength but that i could build a box without them so i tried that and just clamped each side and waited for 5 hours to do the next one.
I routed out the sub cutout and the aero and the terminal cup.
I mounted the sub and roundovered the entire box.
This was my first work with the roundover so don't judge it too harshly //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
I just primed it and it looks like **** because the primer was sprayed on by my brother //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i will sand it off and restart....I will upload pics of it... then i am painting it with a textured black paint.
The box is 1.9 cubes tuned to 32 (biggest box that will fit into my little ass convertable coupe trunk)
Lemme know what you think